<div dir="ltr">You could try the UK NCM databases:<div><a href="http://www.ncm.bre.co.uk/filelibrary/NCM_databases_v4.1.e.zip">http://www.ncm.bre.co.uk/filelibrary/NCM_databases_v4.1.e.zip</a><br></div><div><br></div><div>
Or, lighting table 9.6.1 in ASHRAE 90.1 and Table G-N in the 90.1 user manual.</div><div><br></div><div>For infiltration, CIBSE guide A section 4 provides guidance including some look up tables with recommended air change rates - if you already know the envelope permeability.</div>
<div><br></div><div>Hope this helps. </div><div><br></div><div>Chris</div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On Thu, Feb 20, 2014 at 10:08 PM, Santiago Velez <span dir="ltr"><<a href="mailto:santiagogvelez@gmail.com" target="_blank">santiagogvelez@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Dear Rasheed, <a href="http://www.sweettgroup.com/viewfile.cfm?id=152&h=B2CC39C4651FD324C460E1580AA1314D5BB8F49CB5E28A8AEF8654B0B8766CA9" target="_blank">this link might be helpful</a>. It's a guide on sustainable design of warehouse in the UK. It involves a parametric analysis from which you can extract typical benchmarks for different variables.<div>

<br></div><div>Best regards,</div><div>Santiago.</div><div><br></div><div><br></div></div><div class="gmail_extra"><br><br><div class="gmail_quote">2014-02-20 18:06 GMT-03:00 Rasheed Ahmad <span dir="ltr"><<a href="mailto:rasheed.jmi@gmail.com" target="_blank">rasheed.jmi@gmail.com</a>></span>:<br>

<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div><div class="h5"><div dir="ltr"><br><br><div class="gmail_quote">---------- Forwarded message ----------<br>From: <b class="gmail_sendername">Rasheed Ahmad</b> <span dir="ltr"><<a href="mailto:rasheed.jmi@gmail.com" target="_blank">rasheed.jmi@gmail.com</a>></span><br>


Date: Thu, Feb 20, 2014 at 5:30 PM<br>Subject: Air tightness for an Industrial Building<br>To: <a href="mailto:bldg-sim-request@lists.onebuilding.org" target="_blank">bldg-sim-request@lists.onebuilding.org</a><br><br><br>

<div dir="ltr">Hello all,<div>
<br></div><div>I am modelling an industrial building according to European climate.  My problem is they dont have any data  which i can use for my modelling. So i need to use the standard data to model. If any one has done before please help  me. </div>



<div><br></div><div>What could be the appropriate values for lighting , equipment's , Load , HVAC and leakage shall be</div><div> used.</div><div><br></div><div>Looking forward for help.</div><div><br></div><div>Thanks in Advance</div>



</div>
</div><br></div>
<br></div></div>_______________________________________________<br>
Bldg-sim mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><br>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG" target="_blank">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br></blockquote></div><br></div>
<br>_______________________________________________<br>
Bldg-sim mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><br>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br></blockquote></div><br></div>