<p dir="ltr">Dear bldg sim'rs </p>
<p dir="ltr">I'm a little concerned that the plug loads I've modelled in my offices are low and could leed to some unwanted usgbc comments.</p>
<p dir="ltr">I'm meeting the 25% requirement but the peak load in the offices is 10w/m2. Whilst i dont think this is overly optimistic the reviewers may think otherwise. Has anybody had experience of plug loads being queried in detail?</p>

<p dir="ltr">Many thanks</p>
<p dir="ltr">Chris</p>
<p dir="ltr">Sent from my Android device. Please excuse typos, etc.</p>