<div dir="ltr">We're modeling a big box retail store with PSZ systems. We'd like to determine the savings associated with installing a packaged vav system. We're having a hard time getting the central heating (furnace) activated with this system type in eQUEST. We have set the HEAT-SET-T to 95 and included a heating capacity value. We do not have any zone reheat.  In cooling mode, we'd like the  DX supply flow to decrease first. In heating mode, we'd like the supply flow to also decrease first. <div>
<br></div><div>We have single zone systems and are not really using these system types (PVAVS and PVVT) as intended but thought we could get it to work. Any thoughts about this approach or an equivalent alternative? <br><div>
<br></div><div><br><div>Thanks!</div><div><br clear="all"><div><br></div>-- <br>Ellen Franconi, PhD, LEED AP, BEMP<br>Senior Consultant, Built Environment Team<br><br>Rocky Mountain Institute<br>1820 Folsom Street<br>Boulder, CO 80302<br>
303.567.8609 (Desk)<br>303.245.7213 (Fax)<br><br>Rocky Mountain Institute drives the efficient and restorative use of<br>resources, creating a world thriving, verdant, and secure, for all, for ever.<br><br><a href="http://www.rmi.org" target="_blank">http://www.rmi.org</a>
</div></div></div></div>