Hi all,<div>I am trying to get an idea of how to model a new mixed use building (Office + retail) with a existing district cooling plant  serving other office buildings on the site for LEED purposes.</div><div>Since it is a district cooling system, the plant  load, efficiency , performance and operation is dependent on the other existing buildings on the site as well. I am not sure how to separate the energy metrics in the model  for the plant associated with the  new proposed building.</div>

<div><br></div><div>1.Does the baseline building model also has to take into consideration the existing plant in simulation or the baseline will be just modeled is it will be for a new building with the plant type being decided by the conditioned square footage of the new proposed building?</div>

<div>2. When modeling the proposed building, do i neglect the effects of other building on the district cooling plant performance and use the part load efficiency curves and load shedding schedules for the plant equipments ( towers, pumps, Chillers) as if they were serving only the new proposed building? has anyone done a model like this and how does the LEED guidelines approach this issue?</div>

<div><br></div><div>The simulation community help is much appreciated.</div><div>Please respond if you have any questions as well.</div><div><br clear="all"><div><br></div>-- <br>Thanks<br><br>Sincerely,<br>Amit Bhansali, LEED Green Associate, M.S. , EIT<br>

Mobile: (+1)972-207-5180<br>           <br><a href="http://www.godparents.in/" target="_blank">www.godparents.in</a><br>Please do not print this e-mail unless necessary
</div>