<div><font color="#336666" face="verdana, sans-serif">Good day to all..</font></div><div><font color="#336666" face="verdana, sans-serif"><br></font></div><div><font color="#336666" face="verdana, sans-serif">Working on modeling an existing building per 90.1 for LEED certification and can not find clear answers in the standard or users guide- and seeking of the advise of the Bidg-Sim community- </font></div>

<div><font face="arial, helvetica, sans-serif">The building is basically a shell- the 6 inch tilt up concrete walls and concrete floor are the only things remaining un-changed. The building is installing new HVAC systems, a new roof, a new lighting systems, new skylights, new doors, new windows and insulating the existing walls. The space is 35,000 square feet, and beside another building. The building owners bought out their former neighbor and are expanding into their space, the space shares a wall with their current space. </font></div>


<div><font face="arial, helvetica, sans-serif"><br></font></div><div><ol><li><font face="arial, helvetica, sans-serif">Adiabatic wall- Should it be Modeled with an adiabatic wall separating the "two" buildings (that are actually one building with a separating wall and separate address), or should the "other building" not seeking LEED certification be included in the model?</font></li>


<li><font face="arial, helvetica, sans-serif">Rotated average baseline- This is an existing building and orientation is set, so is this procedure still necessary or required by 90.1/LEED</font></li><li><font face="arial, helvetica, sans-serif">Baseline Constructions- Should the baseline reflect the walls as they where before renovation (Un insulated tilt up concrete walls/R-5 roof deck?) or should it use the ASHRAE light weight constructions with 2007 insulation for the climate, or should it use the actual constructions but add ASHRAE 2007 insulation?</font></li>


<li><font face="arial, helvetica, sans-serif">The HVAC system is a CAV, with convective natural gas heating and and DX cooling- roof top units, the baseline system for this should be system # 5 PVAV- or should the baseline HVAC system be what ever system was in the building before the renovation?</font></li>

</ol></div><div><font color="#336666" face="verdana, sans-serif"><br>
</font></div><font color="#336666"><font face="verdana,sans-serif"><div><div style="color:rgb(0,0,0);font-family:arial"><font color="#336666" face="verdana, sans-serif">An advanced thank you goes out to all that respond- </font></div>

<br class="Apple-interchange-newline"></div><div><font color="#336666"><font face="verdana,sans-serif"><br></font></font></div>
<br clear="all"></font></font><div style="text-align:left"><font face="verdana, sans-serif" color="#999999"><i>Jeremiah D. Crossett</i></font></div><div style="text-align:left"><font face="verdana, sans-serif" color="#999999"><i>CleanTech Analytics</i></font></div>


<div style="text-align:left"><font face="verdana, sans-serif" color="#999999"><i><a href="tel:503-688-8951" value="+15036888951" target="_blank">503-688-8951</a></i></font></div><div><div style="text-align:left"><a href="http://www.cleantechanalytics.com" target="_blank"><font face="verdana, sans-serif" color="#999999"><i>www.cleantechanalytics.com</i></font></a></div>


<div><div style="text-align:center"><br></div><div style="text-align:center"><img src="http://cleantechanalytics.com/images/stories/cleantech%20analytics%20120.PNG"><br></div></div></div><div><div><b><p dir="ltr" style="text-align:center;margin-top:0pt;margin-bottom:0pt">


<span style="vertical-align:baseline;color:rgb(204,204,204);font-style:italic;font-size:11px;white-space:pre-wrap;text-decoration:none;font-family:'Droid Serif';font-weight:normal">This document may contain valuable information proprietary to CleanTech Analytics which is private and confidential. It may not be shared, copied, stored or transmitted in any form without the prior written consent of CleanTech Analytics</span></p>


</b></div></div><br>