<p class="MsoNormal">Hi everyone,</p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">I am working on a California project pursuing Title-24 2008 and
using eQuest for the analysis. The project includes VAV with chilled water cooling
and hot water reheat system . Additionally the system is 100% OA system and also
includes indirect evaporative pre-cooling in the design. My model indicates that
the evaporative pre-cooling is helping on the cooling energy savings ( as
expected) but I am getting heating penalty because of it. </p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">After digging into the simulation output reports it seems that
the reheat energy has increased significantly and the space temperature for the
zones have more hours in the cooling temperature band. I believe that the evaporative
pre-cooling is overcooling the spaces. Further, I think that the evaporative
pre-cooling is treating OA with dry bulb as low as 55F.<span style>  </span></p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">Can somebody please suggest how to control the evaporative pre-cooling
so that it comes on for OA above 70F temperature only. eQuest has a high limit
set point for evaporative pre coolers but no low limit one. <span style> </span>Also, any thoughts on how to control the increase
in reheat energy. </p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">Thank you</p>

<p class="MsoNormal"> </p>

<p class="MsoNormal">Nidhi</p>