Hi all - I wanted to re-send this announcement for those who missed it the first time. If you have 10 minutes for this short survey, we would appreciate it! The survey is here: <a href="http://www.surveymonkey.com/s/G3GQZB8">http://www.surveymonkey.com/s/G3GQZB8</a><br>

<br>The survey is part of a research study regarding simulated plug/process/receptacle load use in commercial buildings. We are inviting feedback from energy modelers regarding their assumptions for plug load energy use. For more information about the study, please see below. Let me know if you have any questions.<br>

<br>The survey will close June 29th.<br><br>Best,<br>Gwen Fuertes<br><br>Graduate Student Researcher, Center for the Built Environment<br>M.S. Architecture - Building Science 2012, M. Arch Candidate 2014, U.C. Berkeley<br>

Intern, LEED Research, U.S. Green Building Council<br><a href="mailto:gfuertes@berkeley.edu">gfuertes@berkeley.edu</a> <br><br><br>--<br><br><br>This research project is a joint project with the Center for the Built Environment at U.C. Berkeley and with the cooperation of the U.S. Green Building Council. One of the goals of this project is to understand how project teams and energy modelers are simulating the use of plug loads in LEED energy models. To date, little research has been done to evaluate the methods and trends of the energy modeling industry in terms of this particular end use. Since plug loads are becoming one of the most significant end uses in commercial buildings, understanding the simulated and actual energy of plug/receptacle loads will help inform owners and modelers alike on the contribution this has to the total energy use of a new construction or major renovation project.<br>

<br>Typically, equipment falling into the plug/receptacle load category is out of the scope of control of a typical whole-building design team, and there is little information available to the team in the design stage regarding what specific equipment will be installed. Design teams are frequently left to estimate the annual receptacle load energy use and peak demand, using rules of thumb or other standardized/generalized practice. Further research is needed to determine the accuracy of these rules of thumb as compared to actual energy use or a more itemized energy projection, and this study may be a first step towards identifying and describing that potential discrepancy.<br>

<br>This survey aims to understand how energy modelers estimate this end use. Additional details regarding the project can be accessed here, and further questions can be directed to <a href="mailto:gfuertes@berkeley.edu">gfuertes@berkeley.edu</a>.<br>

<br>Again, the link to the survey: <a href="http://www.surveymonkey.com/s/G3GQZB8">http://www.surveymonkey.com/s/G3GQZB8</a><br><br>Thank you for your time!<br>