<html><head><style type='text/css'>p { margin: 0; }</style></head><body><div style='font-family: arial,helvetica,sans-serif; font-size: 12pt; color: #000099'><div style="color:#000;font-weight:normal;font-style:normal;text-decoration:none;font-family:Helvetica,Arial,sans-serif;font-size:12pt;"><br><br><style>p { margin: 0; }</style><div style="font-family: arial,helvetica,sans-serif; font-size: 12pt; color: #000099">Basic LEED questions. I am using the Compliance analysis in eQuest o generate the base design and my questions are<br>1- Does the base design has to have the same number of zones as the actual design ( the compliance analysis is generating less zones).<br>2- The compliance analysis generated R values much higher than what ASHRAE 90.1-2007 calls for. should I manually change them <br>Any help will be greatly appreciated<br>Thank you<br><br><br><hr id="zwchr"><div style="color:#000;font-weight:normal;font-style:normal;text-decoration:none;font-family:Helvetica,Arial,sans-serif;font-size:12pt;"><b>From: </b>"Jason Glazer" <jglazer@gard.com><br><b>To: </b>bldg-sim@onebuilding.org<br><b>Sent: </b>Sunday, May 20, 2012 4:59:25 PM<br><b>Subject: </b>[Bldg-sim] SPC209 Energy Simulation Aided Design Meeting in San Antonio<br><br>ASHRAE SPC 209 Energy Simulation Aided Design for Buildings <br>Except Low-Rise Residential Buildings will be having our <br>first meeting during the upcoming San Antonio ASHRAE conference:<br><br>San Antonio<br>Tuesday June 26 8:00am - Noon<br>Convention Center at River Level Room 006B<br><br>For easy access to meetings in 006 follow signs to <br>convention center down escalator past the Hyatt restaurant <br>and enter the convention center, rooms are straight down the <br>hallway.<br><br>Jason<br>_______________________________________________<br>Bldg-sim mailing list<br>http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org<br>To unsubscribe from this mailing list send a blank message to BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG<br><br></div><br></div></div><br></div></body></html>