<p><span style="mso-ansi-language:EN-GB"> I have
2 doubts concerning the use of TRNSYS for LEED.</span>
</p><ol style="margin-top:0cm" start="1" type="1"><li class="MsoNormal" style="margin-bottom:0cm;margin-bottom:.0001pt;line-height:
150%;mso-list:l0 level1 lfo1"><span style="mso-ansi-language:EN-GB">Autosizing.
The equipment capacities for the baseline building design shall be based
on sizing runs for each orientation (see G3.1.2.2 and G3.1.2.2.1 of ASHRAE
90.1:2007). Is "autosizing" equipment capacities according to
ASHRAE possible with TRNSYS?</span></li><li class="MsoNormal" style="margin-bottom: 0.0001pt; line-height: 150%;"><span style="">Compliance
summaries (Input summaries and output summaries). Does TRNSYS produce compliance
summaries according to LEED? If the TRNSYS user has to integrate the
compliance summaries in order to satisfy the LEED standard, does that
integration require a lot of work?</span></li></ol><p>Best Regards<br></p>
<p style="margin: 0px; padding: 0px;" class="MsoNormal"><span style="">Francesco Passerin</span></p><div style="position: absolute; left: -10000px; top: 0px; width: 1px; height: 1px; overflow: hidden;" id="_mcePaste"> </div>