<html>
<body>
Oleksandra<br>
You can't directly model the water cooled condenser with EE4. You
would have to edit the .DOE file and run from the command line. The
DOE2.1e Supplement, 3.83 details the water cooled condenser.
Available on the PSZ, PVAVS, and PVVT systems.<br><br>
<br>
At 05:22 PM 30/04/2012, Oleksandra Onisko wrote:<br>
<blockquote type=cite class=cite cite="">Hello All, <br><br>
I am trying to model an air handler in EE4 which has a hot water heating
coil and DX cooling but with a remote water-cooled condenser. Is it
possible to model this system in EE4? Any suggestions on work-arounds?
<br><br>
Thanks, <br><br>
___________________________________________<br><br>
Oleksandra Onisko, <a href="http://B.A.Sc">B.A.Sc</a>., LEED AP BD+C<br>
Project Manager & Energy Modeler <br><br>
<font color="#31849B">ECOVERT | Sustainability Consultants</font><br>
<font color="#31849B">
Office 416.350.2002</font><font color="#595959"><br>
</font>
Direct Line 416.987.1105<br>
Fax 416.766.5021<br>
55 Ormskirk Avenue<br>
Toronto, ON, M6S 4V6<br>
<a href="http://www.ecovert.ca">www.ecovert.ca</a><br><br>
_______________________________________________<br>
Bldg-sim mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org" eudora="autourl">
http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><br>
To unsubscribe from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</blockquote>
<x-sigsep><p></x-sigsep>
>><br>
Christopher Jones, P.Eng.<br>
Suite 1801, 1 Yonge Street<br>
Toronto, ON M5E1W7<br>
Tel. 416-203-7465<br>
Fax. 416-946-1005<br>
email cj@enersave.ca<br>
</body>
</html>