<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#FFFFFF" text="#000000">
Just a hunch, but check the value input for
COMPLIANCE:C-901-NUMFLRS. See "Step 2: Enter Compliance and Site
Parameters Information" in the document "LEED Analysis.pdf" found in
the Help/Tutorials and Reference eQUEST menu selection. Make sure
that value reflects the actual building. If it's more than 5, and
the heat source is "electric and other" you will get a PIU baseline
system per Table G3.1.1A.
<pre class="moz-signature" cols="72">
</pre>
<pre class="moz-signature" cols="72">Kevin Madison PE
Madison Engineering PS
444 NE Ravenna Blvd Suite 406
Seattle WA 98115
206-834-0002
<a class="moz-txt-link-abbreviated" href="http://www.madisonengineeringps.com">www.madisonengineeringps.com</a></pre>
<br>
On 1/23/2012 2:15 PM, norman wheatley wrote:
<blockquote
cite="mid:CAMSdQWAYgnrMrwaLE64Px-zgoRXPFDEdizBxnKj=C2H4tD4arw@mail.gmail.com"
type="cite">
<meta http-equiv="Context-Type" content="text/html;
charset=iso-8859-1">
Hi,<br>
<br>
I'm trying to use eQuest for a LEED submission. It aint easy!<br>
<br>
I can get my proposed model to run the LEED compliance check and
generatw a LEED baseline model. The trouble is, this baseline has
a single large PIU HVAC system rather than the 9 Packaged system
of the proposed model.<br>
<br>
IS this valid? Systems very strange to me!<br>
<br>
Norm Wheatley<br>
</blockquote>
</body>
</html>