Hi everyone<br><br>I began to learn TRNSYS a couple of days ago and I came across some questions right now. I wonder if somebody happens to know TRNSYS well.The questions are:<br>1. When Editing type 56, in
 the Ventilation lable, the Heating and Cooling option can be set up by 
defining airchange rate and temperature & RH of air flow; while in 
both the Cooling lable and Heating lable, the cooling and heating option
 can be set up by defining cooling / heating power (does that mean I 
need to estimate the cooling / heating load before set this block up?), 
and the setpoint temperature & RH. As a result, type 56 provides two
 methods to define HVAC system. Do I need to set up both the labes to get it work?. <br>
<br>2. In addition to adding the information of HVAC in type 56, do I 
need to creat the HVAC system in to get the information of energy 
consumption of HVAC system?<br><br>Thanks!<br clear="all"><br>-- <br>Chou Shen<br>Graduate Research Assistant<br>Department of Civil, Architectural & Environmental Engineering<br>Missouri University of Science and Technology<br>
<br><br><br>