Hi <br><br>I have some problem when using Ecotect to make thermal analysis.<br>In thermal calculation I can get some gains and loads as following:<br>1. in MONTHLY HEATING/COOLING LOADS, I can get the Max Heating/Cooling loads and the time<br>
2. in HOURLY GAINS I can choose the particular time in 1 and get the HVAC load<br>3. I can get fabric, direct solar.... gains at some particular time and then make a sum, so I get another gain<br><br>I thin there three gains or laods should be the same, but acturally they aren't. I am confused.<br>
<br clear="all"><br>-- <br>Chou Shen<br>Graduate Research Assistant<br>Department of Civil, Architectural & Environmental Engineering<br>Missouri University of Science and Technology<br><br><br><br>