Jeong, Marcus, et al<br><br>That does of course assume you can get the properties of the window film from the manufacturer, which for new films can be easier said than done. The other issue is that many providers of the product ( not necessarily the manufacturers here) provide information for the film having been tested applied to a clear float glass and sometimes even for entire units, so it can be sometimes difficult to get the actual performance data of the film.<br><br>Shading coefficient is a quick way of including shades, etc in some other programs still use rather than the way EnergyPlus takes everything back to first principles calculations. Could still be useful if you are looking at say "living wall" features for example without having to go into the complexity of using a "shading" block or surface with a scheduled transmissivity.<br><br>Regards<br>Paul<br><br><br><br><br><br>Sent from my HTC<br><br>Dr Paul Carey<br>Director<br><br>Zero Energy Design Ltd<br>10a Portland Place<br>2-22 Mottram Road<br>Stalybridge<br>Cheshire<br>UK<br>SK15 3AD<br><br>Tel - +44 161 3386200<br>Mob - +44 789 4098012<br>Email - paul@zed-uk.com<br><br><br><br>----- Reply message -----<br>From: "Marcus" <jones.0bj3@gmail.com><br>Date: Tue, Jul 12, 2011 10:06<br>Subject: [Bldg-sim] Fwd:  insulation film on windows in EnergyPlus<br>To: <br>Cc: <bldg-sim@lists.onebuilding.org><br><br><br>I don't think a WindowMaterial:Shade will properly account for the film, I<br>would instead look into creating your window in the software WINDOW from<br>LBL. This software can model detailed layer-by-layer windows with frames and<br>full spectral data, which can then be exported into EnergyPlus.<br><br><a href="http://windows.lbl.gov/software/window/window.html">http://windows.lbl.gov/software/window/window.html</a><br><br>Good luck and I hope you let us know your solution!<br><br>P.S. EnergyPlus talks about the SHGC or g-Value of windows, not shading<br>coefficients. You can convert between them.<br><br>Marcus<br>-- <br>Marcus Jones, LEED AP, M.Sc.<br>*Freelance energy consultant*<br>*Vienna, Austria*<br><br><br><br>2011/7/11 윤정훈 <superfig@hotmail.com><br><br>>  Hello,<br>><br>> I'm running simulation wih EnergyPlus.<br>> In order to apply ECMs, I'm trying to apply insulation films to each<br>> window.<br>> The object I used is *WindowMaterial:Shade*, but I don't think my way is<br>> correct.<br>> I have limited information (Available data include solar reflectance,<br>> visible reflectance/transmittance, and shading coefficient),<br>> which is further complicating the situation.<br>><br>> Any help will be much appreciated.<br>> Thank you.<br>><br>><br>> _Jeong<br>><br>> p.s. BTW, I do not understand why there's no shading coefficient field in<br>> window-related objects.<br>><br>><br>> _______________________________________________<br>> Bldg-sim mailing list<br>> <a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><br>> To unsubscribe from this mailing list send  a blank message to<br>> BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG<br>><br>><br><br><br><br><br><br><br>-- <br>Marcus Jones, LEED AP, M.Sc.<br>*Freelance energy consultant*<br>*Vienna, Austria*<br><br><br>