Hi Rohini,<div><br></div><div>When you are bill matching there are not magical ways of doing things. You pretty much have to put what's in the building in your model. Those things you can control. The tricky part is to figure out how the building is really being operated and to get the most accurate weather data you can for your site.</div>
<div><br></div><div>Cheers,</div><div><br></div><div>Carol<br><br><div class="gmail_quote">On Fri, Feb 4, 2011 at 8:34 AM, R B <span dir="ltr"><<a href="mailto:slv3sat@gmail.com">slv3sat@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;"><div><br clear="all">Hi All, </div>
<div>While modelling existing building (with calibration to utility bill), do you model every VAV zone or lump similar ones together? What could be possible disadvantages of lumping down the road? Any ECM's that will be affected by this simplification?</div>


<div>Is there a magical way to figure the W/sqft for lighting and plug loads without having to count everything on site? </div>
<div>Thanks for any insights.</div>
<div>-Rohini</div>
<br>_______________________________________________<br>
Bldg-sim mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><br>
To unsubscribe from this mailing list send  a blank message to <a href="mailto:BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br></blockquote></div><br><br clear="all"><br>-- <br>Carol Gardner PE<br>
</div>