<div>Hi Chris and Curtis, </div>
<div> </div>
<div>An interesting topic...</div>
<div> </div>
<div>Curtis, please advice. The virtual partition, to my understanding, is actually No partition. If there is no partition, why color or spectrum characteristics will take effect? I am not so familiar with Energy Plus, but does it have two types of "virtual partition", one is IR transparent and one is not? I also did a quick test in IES VE which can calculate long wave radiant exchange. The way to define virtual partition in IES VE is simply to cut a 100% hole on a solid partition. I tested one room with a window first and the same room divided into 3 equivalent spaces by virtual partitions. It shows the results obtained from the two models are quite similar. It accords with your test by Energy Plus. </div>
<div><br></div><div>Chris, I agree with you that virtual partition is not a 'must' to the perimeter zone. However, in some projects, it is certainly a simplification: without putting up daylight sensor and conducting extra lighting calculation, you can input LPD obtained from lighting designer directly; Or sometimes mechanical designer has specific design in perimeter area and virtual partition method can easily accommodate it without modifying the whole room...etc...etc... </div>
<div><br></div><div>Regards, </div><div>Cheney</div>