<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html; charset=ISO-8859-1"
http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
for leed 2.2 & below i've typically use it in conjunction w/my
narratives and other air device/design data. by itself i find it
useful in showing a range for some design conditions but ... a) it's
old and hasn't been updated (as far as i know). it is based on
55-1992. i point this out in my narratives as the graphs it generates
are based on met & clo & those haven't changed, b) it has an
upper limit on graphs verses met in my experience. if you're using a
low met you probably won't see it but if your met is above 1.6 (i
think) it defaults back down to 1.6 so i'm not sure it is reflective of
higher met levels - like 2 & 3 where you have exercise or heavy
work areas.<br>
<br>
for leed 3 i'm looking at using the software from the ashrae thermal
comfort tools cd in conjunction w/air device selection software that
can calculate adpi values (krueger's can do this) in addition to the
standard narratives & air device/design data.<br>
<br>
On 1/18/11 1:41 PM, Arpan Bakshi wrote:
<blockquote
cite="mid:AANLkTinMdvDo+JY01MeqANsmz4F4dgCKiX4yEq9LH80a@mail.gmail.com"
type="cite">
<div>Anyone familiar with Krueger's comfort tool? </div>
<div>Any thoughts on accuracy, application towards LEED IEQ credits
in lieu of a PPD/PMV simulation?</div>
<div> </div>
<div>Krueger Comfort Tool</div>
<div><a moz-do-not-send="true"
href="http://www.krueger-hvac.com/tools/comfort.asp">http://www.krueger-hvac.com/tools/comfort.asp</a></div>
<div> </div>
<div> </div>
<div>-----------------------------</div>
<div>Arpan Bakshi</div>
<div>YRG sustainability</div>
<div>Direct 646 704 2880</div>
<pre wrap="">
<fieldset class="mimeAttachmentHeader"></fieldset>
_______________________________________________
Bldg-sim mailing list
<a class="moz-txt-link-freetext" href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a>
To unsubscribe from this mailing list send a blank message to <a class="moz-txt-link-abbreviated" href="mailto:BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a>
</pre>
</blockquote>
<br>
</body>
</html>