<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40"
xmlns:ns0="urn:schemas-microsoft-com:office:smarttags">
<head>
<meta http-equiv=Content-Type content="text/html; charset=us-ascii">
<meta name=Generator content="Microsoft Word 12 (filtered medium)">
<!--[if !mso]>
<style>
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style>
<![endif]-->
<style>
<!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p
{mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
span.EmailStyle19
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
-->
</style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=EN-US link=blue vlink=purple>
<div class=WordSection1>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>I see, that makes a little more sense. So if I had a stairwell,
which does not have HIGHER process loads than the average space, and whose
occupancy schedule is basically the same as the rest of the office space, then
I would HAVE to have that stairwell on the base-building System
5-8. I couldn’t have it on its own PSZ-AC. <o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Mike, this goes against what you said in your email. This
is sort of why I asked the question…there doesn’t seem to be a
consensus. I model stairwells, elevator shafts, bathrooms, etc as
separate thermal zones in all of my models, and if I read the letter of the
code, it would seem they need to be their own systems, yet the CIR sort of says
that this isn’t the case, and reviewers agree, and don’t like to
see rooms like this on separate systems.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'>
<p class=MsoNormal><b><span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'>From:</span></b><span
style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> Cheney
[mailto:chenyu73@gmail.com] <br>
<b>Sent:</b> Monday, November 01, 2010 4:35 PM<br>
<b>To:</b> James Hansen<br>
<b>Cc:</b> bldg-sim@lists.onebuilding.org<br>
<b>Subject:</b> Re: [Bldg-sim] Exceptions to G3.1.1, and how you model them?<o:p></o:p></span></p>
</div>
<p class=MsoNormal><o:p> </o:p></p>
<div>
<p class=MsoNormal>Hi James, <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal> <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal> <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>The CIR is dated on 3/23/2007. It clarifies use of
exception to G.3.1.1. to document baseline and achieve greater energy savings
from single-zone systems in <strong><u>high</u></strong> process load areas. <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal> <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>As per G3.1.1. in Appendix G (90.1-2004), my understanding
is to use separate single-zone system for any space has very high occupancy or
process loads or schedules that differ significantly from the rest of the
building. You can understand it in the opposite way that the rooms have
significantly less occupancy or process loads. But I guess the CIR points to
the high process load areas in order to achieve greater energy savings
from single-zone systems. <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal> <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>Regards, <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal style='margin-bottom:12.0pt'>Cheney <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal>On Mon, Nov 1, 2010 at 12:46 PM, James Hansen <<a
href="mailto:JHANSEN@ghtltd.com">JHANSEN@ghtltd.com</a>> wrote:<o:p></o:p></p>
<div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'>Thanks Cheney, but I’m not sure I
follow your email. I’ve already determined that, for example, a
core bathroom could easily have a peak load that is 10 Btu/hr-ft2 less than the
peak average of the rest of my spaces. Same goes for stairs, storage
rooms, etc. So doesn’t 90.1 REQUIRE that I model these separately?</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'> </span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'>What CIR are you referencing?</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:11.0pt;color:#1F497D'> </span><o:p></o:p></p>
<div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span
style='font-size:10.0pt'>From:</span></b><span style='font-size:10.0pt'> Cheney
[mailto:<a href="mailto:chenyu73@gmail.com">chenyu73@gmail.com</a>] <br>
<b>Sent:</b> Monday, November 01, 2010 12:36 PM<br>
<b>To:</b> James Hansen<br>
<b>Cc:</b> <a href="mailto:bldg-sim@lists.onebuilding.org">bldg-sim@lists.onebuilding.org</a><br>
<b>Subject:</b> Re: [Bldg-sim] Exceptions to G3.1.1, and how you model them?</span><o:p></o:p></p>
</div>
<div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>Hi
James, <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>LEED
CIR allows projects to demonstrate substantial energy savings for well-designed
HVAC system serving high process load spaces based on the exception to G3.1.1.
So the premise is "high occupancy or process load" spaces, such
as server rooms, natatoriums, before it comes to the benchmark of 10
btu/h-ft2. Therefore, I guess your storage rooms, stairs, mechanical rooms
should not be modeled separately. <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>Regards,
<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>Cheney
<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
</div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;margin-bottom:12.0pt'>I guess
your storage rooms, stairs, mechanical rooms, lobbies, etc. should not be
<o:p></o:p></p>
</div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>On
Mon, Nov 1, 2010 at 5:12 AM, James Hansen <<a
href="mailto:JHANSEN@ghtltd.com">JHANSEN@ghtltd.com</a>> wrote:<o:p></o:p></p>
<div>
<div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>I
was interested to see if anyone would share how they model the exception to
G3.1.1 in ASHRAE 90.1-2007 (or 04). This is the part that says when you
have a baseline building with system 5-8, you’re supposed to model system
3 or 4 for any spaces that “have occupancy or process loads or schedules
that differ significantly from the rest of the building.” It goes
on to say that basically the peak thermal loads must differ by 10 Btu / h-ft2
or more from the average of the other spaces, or that schedules must differ by
more than 40 full load hours per week, for this exception to apply.<o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>I’ve
had reviewers question certain rooms that I’ve put on separate PSZ-AC
systems, and so I’ve sort of defaulted to putting almost all rooms on the
main systems (5-8). However, in looking at some of my recent
models, depending on interior loads and climate, the actual peak cooling load
on a square foot basis varies anywhere from 5-20 btu / h-ft2 range for
offices. So this means there is a big difference between those models
with 5 btu / h-ft2 peak and those with 20. For the models with 5, almost
every space in the building is going to be within +/- 10 btu/h-ft2 of that
average. However, those buildings that average around 20 will have many
rooms that are < 10 btu/h-ft2 peak (ie any internal space whose light + plug
load density is < 3.0 W / sq ft).<o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span
style='color:red'>To use a simple example as a question: if your
particular office building averaged 20 btuh / h-ft2 peak cooling load, would
you model a separate PSZ-AC system for a core bathroom, whose peak cooling load
is only 3 btu/h-ft2?</span></b><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>There
are lots of rooms where I question whether I should do a separate PSZ-AC/HP
system (storage rooms, stairs, mechanical rooms, lobbies, etc). I can see
where these meet the 10 Btu/h-ft2 delta exception. <o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>So
does everyone really model a bunch of PSZ-AC systems based specifically on the
average peak thermal loads of the building?<o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>I’m
thinking out loud, but if I had an office building that averaged on the low
side (5 Btu/h-ft2) for cooling peaks, it seems pretty easy to have a perimeter
conference room that exceeded 15 Btu / h-ft2 peak. Seems like an
exhaustive process to confirm this delta for every room in a model to determine
whether it needs its own system…<o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'>Sorry
for the long email. Thanks!<o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span
style='color:teal'>GHT Limited<br>
</span><span style='color:black'>James Hansen, PE, LEED AP</span></b><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span
style='font-size:10.0pt;color:black'>Senior Associate</span></b><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:7.5pt;color:black'>1010 N. Glebe Rd, Suite 200</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:7.5pt;color:black'>Arlington, VA 22201-4749</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:7.5pt;color:black'>703-338-5754 (Cell)</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:7.5pt;color:black'>703-243-1200 (Office)</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:7.5pt;color:black'>703-276-1376 (Fax)</span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='color:teal'><a href="http://www.ghtltd.com/"><span style='font-size:
10.0pt'>www.ghtltd.com</span></a></span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><b><span
style='color:#31849B'> </span></b><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
</div>
</div>
<div class=MsoNormal align=center style='text-align:center'><span
style='font-size:10.0pt;color:blue'>
<hr size=2 width="100%" align=center>
</span></div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'><span
style='font-size:10.0pt;color:black'>The information contained in this communication
is confidential, may be privileged, and is intended only for the use of the
addressee. It is the property of GHT Limited. Unauthorized use,
disclosure or copying of this communication or any part thereof is strictly
prohibited and may be unlawful. If you have received this communication
in error, please notify me immediately by return e-mail or by e-mail to <a
href="mailto:ght@ghtltd.com">ght@ghtltd.com</a>, and destroy this communication
and all copies thereof, including all attachments. Thank you.</span> <o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:auto;margin-bottom:12.0pt'><br>
_______________________________________________<br>
Bldg-sim mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><br>
To unsubscribe from this mailing list send a blank message to <a
href="mailto:BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a><o:p></o:p></p>
</div>
<p class=MsoNormal style='mso-margin-top-alt:auto;mso-margin-bottom-alt:auto'> <o:p></o:p></p>
</div>
</div>
</div>
</div>
<div>
<div>
<div class=MsoNormal align=center style='text-align:center'><span
style='font-size:10.0pt;font-family:"Tahoma","sans-serif";color:blue'>
<hr size=2 width="100%" align=center>
</span></div>
<p class=MsoNormal><span style='font-size:10.0pt;font-family:"Arial","sans-serif";
color:black'>The information contained in this communication is confidential,
may be privileged, and is intended only for the use of the addressee. It
is the property of GHT Limited. Unauthorized use, disclosure or copying
of this communication or any part thereof is strictly prohibited and may be
unlawful. If you have received this communication in error, please notify
me immediately by return e-mail or by e-mail to </span><span style='font-size:
10.0pt;color:black'><a href="mailto:ght@ghtltd.com"><span style='font-family:
"Arial","sans-serif"'>ght@ghtltd.com</span></a></span><span style='font-size:
10.0pt;font-family:"Arial","sans-serif";color:black'>, and destroy this
communication and all copies thereof, including all attachments. Thank
you.</span> <o:p></o:p></p>
</div>
</div>
</div>
<p class=MsoNormal><o:p> </o:p></p>
</div>
</body>
<!--[object_id=#ghtltd.com#]--><P align=left><FONT size=2><FONT face=Tahoma><FONT color=#0000ff>
<HR>
</FONT></FONT><FONT color=#0000ff><FONT color=#000000><FONT face=Arial>The information contained in this communication is confidential, may be privileged, and is intended only for the use of the addressee. It is the property of GHT Limited. Unauthorized use, disclosure or copying of this communication or any part thereof is strictly prohibited and may be unlawful. If you have received this communication in error, please notify me immediately by return e-mail or by e-mail to </FONT><A href="mailto:ght@ghtltd.com"><FONT face=Arial>ght@ghtltd.com</FONT></A><FONT face=Arial>, and destroy this communication and all copies thereof, including all attachments. Thank you.</FONT></FONT><FONT face=Tahoma color=#000000></FONT></P></FONT></FONT></html>