<div>Good Evening Everyone:<br>I have a question about high cooling loads I am getting in my simulation.  I have developed a simulation in Design Builder, using Energy+ as the simulation engine.  It has been developed acording to ASHRAE 90.1-2007 AppG, and it is for a leased space of 11,000+ SF.  Additionally, I specified System #4 - PSZ-HP.</div>

<div>I double checked my weather file, equipment loads, and lighting loads, and they are within range.  However, my cooling loads are almost 4 times as high as my heating (Heating = 3.4 kbtu/sqft-yr & Cooling = 12.4 kbtu/sqft-yr).</div>

<div>My major concern with this is that when I use CBECS as a reference the heating and cooling loads are almost reversed from what I am getting.  </div>
<div>I have read over the Design Builder Users Manual to verify that I have not overlooked anything, but I am at a loss...</div>
<div>My simulation may be correct, however I did want to get a second opinion.  Any information or suggestions is appreciated.</div>
<div> </div>
<div>Thanks,</div>
<div>Cory Estep</div>
<div>MARCH/MSSD Candidate</div>
<div>The Catholic University of America</div>