Hi, <div><br></div><div>I tried to use eQUEST to generate simulation for different chiller system and collect data about the overall efficiency of the chiller units. </div><div><br></div><div>For this simulation i used 2 units of 450 tons chiller set at COP of 6. </div>
<div><br></div><div>I then refer to the report PS-C, to compute the overall COP (Using cooling load / electricity used) </div><div><br></div><div>Something im not sure about is when i get the detailed report, for some cases like reciprocating hermetic chiller, centrifugal hermetic variable speed chiller and centrifugal open variable speed chiller, i get an overall COP of 6.1- 6.3 which are higher than the set COP of 6. </div>
<div><br></div><div>Im wondering if my way of calculating overall COP makes any sense and how can i explain the situation where the actual performance are higher than the pre-set COP. </div><div><br></div><div>Any comments or advise on this? </div>
<div><br></div><div><br></div><div>SY</div>