<HTML>
<HEAD>
<TITLE>Re: [Bldg-sim] Why should roofs have high emissivity?</TITLE>
</HEAD>
<BODY>
<FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'>Another point to consider is that ambient temperature affects HVAC system performance. If you&#8217;ve got rooftop mounted condensers, they&#8217;ll operate much better on a &#8220;cool&#8221; roof.<BR>
<BR>
Not sure how you&#8217;d model that effect.<BR>
<BR>
--<BR>
<BR>
Chris Schaffner, PE, LEED AP, LEED Faculty&#8482;<BR>
Founder and Principal<BR>
<BR>
The Green Engineer, LLP<BR>
Sustainable Design Consulting<BR>
50 Beharrell Street<BR>
Concord, MA 01742<BR>
T: 978.369.8978<BR>
M:978.844.1464<BR>
<a href="chris@greenengineer.com">chris@greenengineer.com</a><BR>
www.greenengineer.com<BR>
<BR>
<BR>
On 12/2/09 7:38 AM, &quot;Bishop, Bill&quot; &lt;<a href="wbishop@pathfinder-ea.com">wbishop@pathfinder-ea.com</a>&gt; wrote:<BR>
<BR>
</SPAN></FONT><BLOCKQUOTE><FONT COLOR="#000080"><FONT SIZE="2"><FONT FACE="Arial"><SPAN STYLE='font-size:10pt'>I&#8217;ll add some general info to the discussion and do a little summing up.<BR>
&nbsp;<BR>
LBL has studied emissivity and reflectance and has annual energy impact results for hot and cold climates:<BR>
<a href="http://eetd.lbl.gov/HeatIsland/CoolRoofs/HeatTransfer/Heating.html">http://eetd.lbl.gov/HeatIsland/CoolRoofs/HeatTransfer/Heating.html</a><BR>
&nbsp;<BR>
The Heat Island Group has a lot of information available pertinent to the emissivity discussion:<BR>
<a href="http://eetd.lbl.gov/HeatIsland/">http://eetd.lbl.gov/HeatIsland/</a><BR>
&nbsp;<BR>
We&#8217;ve been focusing on roofs, but window design also has to consider the same effects. For glazing, we add the property of transmissivity (radiation passing through the surface) and we have to get more specific about the types of radiation (solar, visible, UV, infrared) and the direction (outside vs. inside, as well as angle of incidence).<BR>
<a href="http://www.commercialwindows.umn.edu/issues_energy1.php">http://www.commercialwindows.umn.edu/issues_energy1.php</a><BR>
&nbsp;<BR>
For opaque building surfaces, such as roofs, walls and window frames, it is understood that unless stated otherwise:<BR>
Reflectivity and absorptivity values are for solar radiation.<BR>
Emissivity values are for thermal/far-infrared radiation.<BR>
&nbsp;<BR>
1 &#8211; reflectivity = absorptivity<BR>
&nbsp;<BR>
So when ASHRAE 90.1 Table G3.1 requires you to model a roof reflectivity of 0.30, you can use an absorptance of 0.70 (such as when modeling in eQUEST).<BR>
&nbsp;<BR>
While there are technical distinctions, the following terms are generally used interchangeably:<BR>
Reflectance/reflectivity<BR>
Absorptance/absorptivity<BR>
Emittance/emissivity<BR>
&nbsp;<BR>
~Bill<BR>
&nbsp;<BR>
</SPAN></FONT></FONT></FONT><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'><BR>
</SPAN></FONT><FONT SIZE="2"><FONT FACE="Franklin Gothic Medium"><SPAN STYLE='font-size:10pt'><B>William Bishop, EIT, LEED&reg; AP <FONT COLOR="#006600">|</FONT> Pathfinder Engineers &amp; Architects LLP<BR>
</B></SPAN></FONT></FONT><FONT SIZE="1"><FONT FACE="Arial"><SPAN STYLE='font-size:9pt'>Mechanical Engineer<BR>
</SPAN><SPAN STYLE='font-size:5pt'> <BR>
</SPAN><FONT COLOR="#000080"><SPAN STYLE='font-size:9pt'>134 South Fitzhugh Street<BR>
</SPAN></FONT></FONT><FONT COLOR="#000080"><SPAN STYLE='font-size:9pt'><FONT FACE="Times New Roman"> </FONT><FONT FACE="Arial">Rochester, NY 14608<BR>
T: (585) 325-6004 </FONT></SPAN></FONT><SPAN STYLE='font-size:9pt'><FONT FACE="Arial">Ext. 114<BR>
<FONT COLOR="#000080">F: (585) 325-6005<BR>
</FONT><a href="wbishop@pathfinder-ea.com">wbishop@pathfinder-ea.com</a><BR>
www.pathfinder-ea.com<BR>
</FONT></SPAN></FONT><FONT COLOR="#008000"><FONT SIZE="5"><FONT FACE="Webdings"><SPAN STYLE='font-size:18pt'>P</SPAN></FONT></FONT><FONT FACE="Times New Roman"><SPAN STYLE='font-size:12pt'> </SPAN><FONT SIZE="1"><SPAN STYLE='font-size:7pt'>Please strive to live sustainably.<BR>
</SPAN></FONT></FONT></FONT><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'>
</SPAN></FONT>
<P ALIGN=CENTER>
<FONT FACE="Times New Roman"><SPAN STYLE='font-size:12pt'><HR ALIGN=CENTER SIZE="2" WIDTH="100%"></SPAN></FONT>
<P>
<FONT SIZE="2"><FONT FACE="Tahoma, Verdana, Helvetica, Arial"><SPAN STYLE='font-size:10pt'><B>From:</B> <a href="bldg-sim-bounces@lists.onebuilding.org">bldg-sim-bounces@lists.onebuilding.org</a> [<a href="mailto:bldg-sim-bounces@lists.onebuilding.org">mailto:bldg-sim-bounces@lists.onebuilding.org</a>] <B>On Behalf Of </B>Christopher Schaffner<BR>
<B>Sent:</B> Wednesday, December 02, 2009 6:48 AM<BR>
<B>To:</B> <a href="muehleisen@iit.edu">muehleisen@iit.edu</a>; Chris Jones<BR>
<B>Cc:</B> <a href="bldg-sim@lists.onebuilding.org">bldg-sim@lists.onebuilding.org</a><BR>
<B>Subject:</B> Re: [Bldg-sim] Why should roofs have high emissivity?<BR>
</SPAN></FONT></FONT><FONT FACE="Times New Roman"><SPAN STYLE='font-size:12pt'> <BR>
</SPAN></FONT><FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'>Of course, if your roof is well insulated, it will be covered with snow. I doubt very much that your &#8220;warm&#8221; roof will really help much. Go with the cool roof. <BR>
<BR>
--<BR>
<BR>
Chris Schaffner, PE, LEED AP, LEED Faculty&#8482;<BR>
Founder and Principal<BR>
<BR>
The Green Engineer, LLP<BR>
Sustainable Design Consulting<BR>
50 Beharrell Street<BR>
Concord, MA 01742<BR>
T: 978.369.8978<BR>
M:978.844.1464<BR>
<a href="chris@greenengineer.com">chris@greenengineer.com</a><BR>
www.greenengineer.com<BR>
<BR>
<BR>
On 12/2/09 12:26 AM, &quot;Ralph Muehleisen&quot; &lt;<a href="muehleisen@gmail.com">muehleisen@gmail.com</a>&gt; wrote:<BR>
Chris makes a good point to consider with cool roofs.<BR>
<BR>
A cool roof will indeed reduce solar heat gain to the roof which reduces its temp (good in summer) and reduces cooling requirements in summer but will increase heating requirements in the winter.<BR>
<BR>
Until someone develops a material where the emissivity changes with temperature (and not just wavelength) a cool roof that is good in summer will be bad in winter.<BR>
<BR>
So, in colder climates, a cool roof can indeed increase the overall energy use of a building.<BR>
<BR>
Even so, some northern cities like Chicago, mandate cool roofs in building code. &nbsp;Why? &nbsp;Because the cool roof will reduce the urban heat island effect where the city has increased temperatures compared to the surrounding areas. &nbsp;<BR>
<BR>
The thought is that the overall benefits of the &nbsp;reduction in urban heat island effect in summer is more important than the increased energy use that comes from increased winter cooling load.<BR>
<BR>
<BR>
Ralph<BR>
<BR>
Ralph Muehleisen, Ph.D., P.E., LEED AP, FASA<BR>
Assistant Professor and Director of the Miller Acoustics Lab<BR>
Civil, Architectural and Environmental Engineering<BR>
Illinois Institute of Technology<BR>
Chicago, IL 60616<BR>
<a href="muehleisen@iit.edu">muehleisen@iit.edu</a><BR>
tel: 312-567-3545 &nbsp;fax:312-567-3519<BR>
<BR>
<BR>
On Tue, Dec 1, 2009 at 6:28 PM, Chris Jones &lt;<a href="cj@cr-jay.ca">cj@cr-jay.ca</a>&gt; wrote:<BR>
In some cases it may be counter productive to use a high emissivity roof. &nbsp;I have worked on uncooled warehouses where the team used an approved roofing product to get that point but the heating energy increased enough to lower the savings enough to lose an EAc1 point. &nbsp;<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
Chris Jones<BR>
14 Oneida Avenue<BR>
Toronto, ON M5J 2E3.<BR>
Tel. &nbsp;416-203-7465<BR>
Fax. 416-946-1005<BR>
<BR>
<BR>
_______________________________________________<BR>
Bldg-sim mailing list<BR>
<a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><BR>
To unsubscribe from this mailing list send &nbsp;a blank message to <a href="BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a><BR>
&nbsp;
</SPAN></FONT>
<P ALIGN=CENTER>
<FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'><HR ALIGN=CENTER SIZE="3" WIDTH="95%"></SPAN></FONT>
<P>
<FONT FACE="Verdana, Helvetica, Arial"><SPAN STYLE='font-size:11pt'><BR>
</SPAN><FONT SIZE="2"><SPAN STYLE='font-size:10pt'>_______________________________________________<BR>
Bldg-sim mailing list<BR>
<a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><BR>
To unsubscribe from this mailing list send &nbsp;a blank message to <a href="BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a><BR>
</SPAN></FONT><SPAN STYLE='font-size:11pt'><BR>
<HR ALIGN=CENTER SIZE="3" WIDTH="95%"></SPAN><FONT SIZE="2"><SPAN STYLE='font-size:10pt'>_______________________________________________<BR>
Bldg-sim mailing list<BR>
<a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><BR>
To unsubscribe from this mailing list send &nbsp;a blank message to <a href="BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a><BR>
</SPAN></FONT></FONT></BLOCKQUOTE>
</BODY>
</HTML>