Dear all:<br><br>We´re currently working with DOE 2.2 v 4.2, and we find that when we try to define a chiller control sequence, when we simulate, none of the two available chillers is working.<br><br>We copy here the *.inp paragraphs corresponding to cool loop and control definition, just in case somebody can give us a clue about it.<br>
<br><br>$ ---------------------------------------------------------<br>$ Circulation Loops<br>$ ---------------------------------------------------------<br>"Circuito AGUA FRIA" = CIRCULATION-LOOP<br>
TYPE = CHW<br> COOL-EQUIP-CTRL = "CONTROL"<br><br><br>$ ---------------------------------------------------------<br>$ Equipment Controls<br>$ ---------------------------------------------------------<br>
<br> "CONTROL" = EQUIP-CTRL <br> TYPE = COOLING<br> CIRCULATION-LOOP = "Circuito AGUA FRIA"<br> CHILLERS-1 = ( "p1","p2" )<br> CHILLERS-SEQ-1 = ( 1 , 2 )<br>
..<br><br>In addition, a warning appers: "equip-ctrl: control has a storage sequence number specified, but no storage device is attached". But we have not defined any storage device or storage sequence.<br><br>
We attach to this mail the corresponding *.inp file.<br><br>Thank you very much in advance. <br>