Charlie,<br><br>Where can you find the emmisivity of each glass in Design Builder? I am looking for the same.<br><br>Nick, I agree with your comments about the 'flip' function in Design Builder. Is there a way to find out which surface has the coating in Design Builder ?<br>
<br>I have not yet used Windows5. <br><br><br>Thanks,<br clear="all">Deepa <br><br>
<br><br><div class="gmail_quote">On Fri, Aug 28, 2009 at 2:46 AM, D. Charlie Curcija <span dir="ltr"><<a href="mailto:curcija@designbuildersoftware.com" target="_blank">curcija@designbuildersoftware.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
WINDOW has function to flip glass. It is a check box "flip" at the glazing layer level. Same function is available in DesignBuilder.<br>
<br>
DesignBuilder includes IGDB and the rule is the same as in WINDOW, surface 1 is facing outdoor, while surface 2 is facing indoors. Same rule applies to layers, first glass is outdoormost, last glass is innermost. In DesignBuiolder you can look at the emissivities of each glass layer and if emissivity is lower than 0.84 (usually low-e is is less that about 0.2), then this is low-e surface. So if the glass that you selected has low-e surface facing wrong side, then you can check "flip" box and reverse it. As somebody pointed out, this reverses the orientation of the glass, not the order of glass in the glazing system. Typically, you want to have one low-e surface in each gap space (having two low-e surfaces in the same gap space provides negligible improvement) and typically you do not want low-e facing either indoor or outdoor (some manufacturers have started using hard coat low-e facing indoors in order to improve U-factor of the glazing system and whole window, but this is still pretty rare due to issues of cleaning exposed low-e surfaces, discoloring, etc. Also, it has negative consequences on condensation resistance.) Thus if you have, for example double glazing system with Pilkington Suncool Brilliant 30/17 (low-e glass) on the outdoor side and Pilkington North America Optifloat Clear (Clear) on the indoor side, you will notice that the low-e surface on the Pilkington Suncool Brilliant 30/17 is surface #1, which would mean that it faces outdoors. So you would check flip box, which will place low-e coating on surface #2, which would be correct becasue it would be facing the glazing gap.<br>
<br>
Charlie Curcija<br>
DesignBuilder Software USA<div><div></div><div><br>
<br>
-------- Original Message --------<br>
Subject: Re: [Bldg-sim] Design Builder : Low E coated surface<br>
From: Chris Yates <<a href="mailto:chris@zed-uk.com" target="_blank">chris@zed-uk.com</a>><br>
To: Nick Kovess <<a href="mailto:Nick.Kovess@meinhardtgroup.com" target="_blank">Nick.Kovess@meinhardtgroup.com</a>><br>
Date: 8/28/2009 5:17 AM<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Nick's right. I didn't have the software in front of me at the time. Window 5 uses the international glazing database that I talked about. DB uses the same data. It is easier to review it in Window. I don't think Window has a flip feature - is that right Nick?<br>
Cheers<br>
Chris<br>
<br>
Sent from my iPhone<br>
<br>
On 28 Aug 2009, at 06:48, "Nick Kovess" <<a href="mailto:Nick.Kovess@meinhardtgroup.com" target="_blank">Nick.Kovess@meinhardtgroup.com</a>> wrote:<br>
<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Hi Deepa,<br>
<br>
I believe 'flip' means to switch which 'surface' on the individual pane the low-E coating is applied to. The order of the panes in the glazing setup will not change if you tick the flip box. When you are building up a glazing system, design builder clearly shows 'outermost pane' and 'innermost pane', these do not change if you check the flip box.<br>
<br>
Basically I believe it is the opposite to what Chris just said.<br>
<br>
In terms of finding out on which surface the coating originally is, and thus where it will move to if 'flipped', I have found using the software Window5 easiest for this. In Window5, find the same pane you wish to use in DesignBuilder and when you look at the glazing set up you can see a dashed line which indicates the location of the coating.<br>
<br>
Hope that helps<br>
<br>
<br>
<br>
Nick Kovess<br>
Engineer | Building Science Group<br>
<br>
Meinhardt<br>
Level 12<br>
501 Swanston Street<br>
Melbourne VIC 3000<br>
Phone: +61 (0) 3 8676 1200<br>
Direct: +61 (0) 3 8676 1366<br>
Mobile: 0413 586 936<br>
Fax: +61 (0) 3 8676 1201<br>
E-mail: <a href="mailto:nick.kovess@meinhardtgroup.com" target="_blank">nick.kovess@meinhardtgroup.com</a><br>
<a href="http://www.meinhardtgroup.com" target="_blank">http://www.meinhardtgroup.com</a><br>
<br>
<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Chris Yates <<a href="mailto:chris@zed-uk.com" target="_blank">chris@zed-uk.com</a>> 28/08/2009 3:14 pm >>><br>
</blockquote></blockquote></blockquote>
Hi Deepa<br>
I think flip means swap the place of inside and outside pane - not<br>
flipping the individual panes so that the coating moves to the<br>
opposite surface.<br>
DB uses the International Glazing Database which you can download from<br>
lbnl. It's easy to use so worth downloading a copy. Unforunately you<br>
can't transfer the results to DB at present.<br>
<br>
Chris<br>
<br>
Sent from my iPhone<br>
<br>
On 28 Aug 2009, at 04:38, deepa chandrashekaran <<a href="mailto:creations.deepa@googlemail.com" target="_blank">creations.deepa@googlemail.com</a><br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
wrote:<br>
</blockquote>
<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Jeff,<br>
<br>
Thank you for responding. I agree that it depends on the climate.<br>
<br>
Design Builder has the option called 'flip' while making the double<br>
pane assembly. Hence I was not clear as to which surface is the<br>
coating on and what does flip actually mean?<br>
<br>
<br>
Deepa<br>
<br>
<br>
On Thu, Aug 27, 2009 at 8:26 PM, Jeff Haberl <<a href="mailto:jhaberl@tamu.edu" target="_blank">jhaberl@tamu.edu</a>> wrote:<br>
The "surface" depends on the climate.<br>
<br>
Cooling dominated climates benefit from the low-E on the inside<br>
surface of the outside pane.<br>
<br>
Heating dominated climates benefit from the low-E on the outside<br>
surface of the inside pane.<br>
<br>
Such characteristics are normally defined by the applicable codes<br>
for a given location.<br>
<br>
Jeff<br>
BB 8=! 8=) :=) 8=) ;=) 8=) 8=( 8=) :=') 8=) 8=) 8=? BB<br>
<br>
Jeff S. Haberl, Ph.D., P.E., <a href="mailto:FASHRAE...................jhaberl@esl.tamu.edu" target="_blank">FASHRAE...................jhaberl@esl.tamu.edu</a><br>
<br>
Professor.<br>
.....................................................Office Ph: 979-845-6507<br>
<br>
Department of Architecture.......................Lab Ph: 979-845-6065<br>
<br>
Energy Systems Laboratory.......................FAX: 979-862-2457<br>
<br>
Texas A&M University..............................77843-3581<br>
<br>
College Station, Texas, USA.......................URL: www-<br>
<a href="http://esl.tamu.edu" target="_blank">esl.tamu.edu</a><br>
<br>
BB 8=/ 8=) :=) 8=) ;=) 8=) 8=() 8=) 8=? 8=) 8=) 8= BB<br>
<br>
From: <a href="mailto:bldg-sim-bounces@lists.onebuilding.org" target="_blank">bldg-sim-bounces@lists.onebuilding.org</a> <<a href="mailto:bldg-sim-bounces@lists.onebuilding.org" target="_blank">bldg-sim-bounces@lists.onebuilding.org</a><br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<br>
</blockquote>
To: Bldg-Sim <<a href="mailto:bldg-sim@lists.onebuilding.org" target="_blank">bldg-sim@lists.onebuilding.org</a>><br>
Sent: Thu Aug 27 21:58:12 2009<br>
Subject: [Bldg-sim] Design Builder : Low E coated surface<br>
Hello all,<br>
<br>
I am trying to model several types of Low E glazing in Design<br>
Builder to understand the effect on the peak heating and cooling load.<br>
<br>
While choosing different glazing, I could not understand which<br>
surface of the glazing has the Low E coating.<br>
<br>
I would appreciate any inputs about this aspect.<br>
<br>
<br>
Thanks,<br>
Deepa Chandrashekaran, LEED AP<br>
Master of Building Science 2010<br>
University of Southern California<br>
<br>
<br>
_______________________________________________<br>
Bldg-sim mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><br>
To unsubscribe from this mailing list send a blank message to <a href="mailto:BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG" target="_blank">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
</blockquote>
<br>
</blockquote>
_______________________________________________<br>
Bldg-sim mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><br>
To unsubscribe from this mailing list send a blank message to <a href="mailto:BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG" target="_blank">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br>
</blockquote>
<br>
</div></div></blockquote></div><br>