<font style="color: rgb(0, 0, 0);"><font size="2"><p><span style="font-size: 11pt;">Hello All,</span></p>

<p><span style="font-size: 11pt;"> </span></p>

<p><span style="font-size: 11pt;">I am working with Design Builder and trying to run simulations
for a building using natural ventilation. While building the model, I
introduced custom openings on the external façade. </span></p>

<p><span style="font-size: 11pt;"> </span></p>

<p><span style="font-size: 11pt;">I ran two simulations using only natural ventilation. One with
all windows closed and the other with 80% open. I input this setting in the
‘Operation’ slider bar within the ‘Openings’ tab. I was expecting the operative
temperature to increase when the windows were closed. But both simulations had
the same results. </span></p>

<p><span style="font-size: 11pt;"> </span></p>

<p><span style="font-size: 11pt;">I am not sure if there is way to model to openings. The
‘Operation’ option was available only under the Internal windows menu and not
for the external window. </span></p>

<p><span style="font-size: 11pt;"> </span></p>

<p><span style="font-size: 11pt;">Would be helpful if anybody could suggest possible solution for
this.</span></p>

<p><span style="font-size: 11pt;"> </span></p>

<p><span style="font-size: 11pt;">Thanks in advance,</span></p>

<p><span style="font-size: 11pt;">Deepa</span></p></font></font>