Also, if you look at pitched roofs in the 3D mode, you'll notice that they're light colored (not dark). This means that eQuest classifies them as "walls" and they are counted as walls in the "details of exterior spaces" summary. Maybe this is where your "roof" heat loss is going too.<br>
<br>--<br>Karen<br><br><div class="gmail_quote">On Tue, Jun 16, 2009 at 12:16 PM, John Aulbach <span dir="ltr"><<a href="mailto:jra_sac@yahoo.com">jra_sac@yahoo.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<br>
Peter:<br>
<br>
Do you have a plenum? The roof loads may be going in there.<br>
<br>
John Aulbach<br>
<br>
--- On Tue, 6/16/09, W. Peter Anderson <<a href="mailto:panderson@jpengineer.com">panderson@jpengineer.com</a>> wrote:<br>
<br>
> From: W. Peter Anderson <<a href="mailto:panderson@jpengineer.com">panderson@jpengineer.com</a>><br>
> Subject: [Bldg-sim] Pitched Roof<br>
> To: "Building Model" <<a href="mailto:bldg-sim@lists.onebuilding.org">bldg-sim@lists.onebuilding.org</a>><br>
> Date: Tuesday, June 16, 2009, 8:04 AM<br>
<div><div></div><div class="h5">><br>
><br>
><br>
><br>
><br>
><br>
><br>
> Greetings-<br>
> I am modeling a 2 story<br>
> office, wood framed<br>
> construction. I selected a 45° pitched roof. <br>
> The model (EQuest 3.63)<br>
> is not showing any conductive roof losses. I have no<br>
> insulation<br>
> choosen.<br>
> <br>
> Do I need to attribute a<br>
> space association or<br>
> something?<br>
> <br>
> Regards,W. Peter Anderson,<br>
> P.E<br>
> JP<br>
> Engineering<br>
> 41 Mechanic Street<br>
> Windsor, CT 06095<br>
> Ph:<br>
> 860/688-5223<br>
> Fax: 860/688-5269<br>
> <br>
> <br>
><br>
><br>
</div></div>> -----Inline Attachment Follows-----<br>
><br>
> _______________________________________________<br>
> Bldg-sim mailing list<br>
> <a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><br>
> To unsubscribe from this mailing list send a blank<br>
> message to <a href="mailto:BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
><br>
<br>
<br>
<br>
_______________________________________________<br>
Bldg-sim mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><br>
To unsubscribe from this mailing list send a blank message to <a href="mailto:BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
</blockquote></div><br>