Teck,<br><br><ol><li>You will need to be in the 'Detailed Data Edit Mode' to be able to accomplish this.</li><li>Once there, check the properties of a window and get to the 'Fins-Overhang' tab.</li><li>Change the angle (OAng) to 60 degree - that will actually give you the 30 deg downward tilt you want. <br>
</li><li>If you want to do this for several windows, go to the windows properties spreadsheet, change display mode to 'Fins & Overhang', and change the overhang properties here. You can edit numbers for one window and copy them for others.</li>
</ol><br>Regards,<br><br>Charudatta Joshi (CJ)<br>MS-Building Design<br>Graduate Teaching Assistant <br>Arizona State University<br>-------------------------------------------<br>Email: <a href="mailto:csjoshi@asu.edu">csjoshi@asu.edu</a><br>
Phone: 480-748-7340<br><br><div class="gmail_quote">On Tue, Mar 10, 2009 at 4:43 AM, Teck Chew <span dir="ltr"><<a href="mailto:chew3yuffie3@yahoo.com">chew3yuffie3@yahoo.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<br>
Hi all,<br>
<br>
Is there a way to model all the window overhangs at 30 degree downward tilt instead of 90 degrees (default) in eQUEST?<br>
<br>
Any suggestion will be much appreciated.<br>
<br>
Thank you<br>
<br>
Warmest Regards,<br>
TC<br>
<br>
<br>
<br>
_______________________________________________<br>
Bldg-sim mailing list<br>
<a href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org" target="_blank">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><br>
To unsubscribe from this mailing list send a blank message to <a href="mailto:BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
</blockquote></div><br>