<br>
<div class="gmail_quote"><br>
<div>I have a model which has three types of fan powered terminal units:</div>
<div>1. Underfloor constant volume units with heating coil - The fan turns on when heating is needed, and uses only recirc air with 10% primary air</div>
<div>In equest, model this with parallel FPB - min heating flow set at 10%, and zone fan cfm at 150; set the schedule to the space heating schedule. Will this make sure that the fan comes on only for heating?</div>
<div>2. Series constant volume fan with heating coil, with varying primary air from 100% to 30%. </div>
<div>
<div>In equest, model this with series FPB - min heating flow set at 100%, and zone fan ratio set to 1. </div>
<div>Question is if the primary air is at 30%, does the seconday air make up the 70% and the fan is modelled as constant volume, or is it variable volume?</div>
<div>3. Parallel variable volume fan with heating coil sized for 50% cfm, varying primary air from 100% to 30%. </div>
<div>
<div>In equest, model this with parallel FPB - min heating flow set at 50%, and zone fan ratio set to 0.5. </div>
<div>What schedule temperature to use such that the fan is used for both heating and cooling?</div>
<div> </div>
<div>Does this seem reasonable? Any thoughts appreciated.</div>
<div>-Rohini</div></div></div></div><br>