<div dir="ltr"><div>Hi all,</div>
<div> </div>
<div>I am seeking advice on how to model the following system in eQuest. Any inputs are appreciated.</div>
<div> </div>
<div>The primary system consists of several electric chillers, which supply chilled water to cooling coils for space cooling. Because this building is located in hot and humid climate, water-to-water heat pump is used to supply hot water, which is used for coil reheat for the purpose of humidity control and domestic hot water. The water-to-water heat pump uses the return chilled water as heat source, thus reducing the energy consumption of the chillers.</div>

<div> </div>
<div>Can this system be modeled in eQuest? I tried loop-to-loop heat pump system in eQuest, but realized that the loop-to-loop heat pump system can only use lake/well as heat resource (is this correct?), and I could not figure out a way to couple the return chilled water loop with the heat pump system.</div>

<div> </div>
<div>Thanks so much.</div>
<div> </div>
<div>Ashley</div></div>