<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
I am not sure if this is the same problem we identified some time ago -
but we did find and fix a problem in the writing of the SIM files from
DOE-2 which was causing the D2SimViewer to only recognize a few reports
for that run. <br>
This problem has been fixed, but I am out of my office and am not sure
which version the fix was made available in. For the time being,
simply use a file editor that can read an ASCII text file (which the
SIM file is) for projects that exhibit this problem.<br>
<br>
- Scott<br>
<br>
<br>
Karen Walkerman wrote:
<blockquote
cite="mid:69a9bc0a0809021115q4f7190ben704a6ef16be3855e@mail.gmail.com"
type="cite">
<div dir="ltr">I had an issue recently where changing the number of
pumps attached to a loop resulted in some of the detailed reports no
being printed to the sim file. This happened no matter what computer I
used to run the file, and was resolved as soon as I indicated only 1
pump to be used. There were no errors and all results were
reasonable. Very strange.<br>
<br>
--<br>
Karen<br>
<br>
<div class="gmail_quote">On Tue, Sep 2, 2008 at 1:39 PM, jimmy jungle
<span dir="ltr"><<a moz-do-not-send="true"
href="mailto:jimmy.jungle@gmail.com">jimmy.jungle@gmail.com</a>></span>
wrote:<br>
<blockquote class="gmail_quote"
style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div dir="ltr"><span style="font-family: Arial; font-size: 12px;">
<div>When I open the .SIM file, I see only three reports in the
pull down menu (LV-M, LV-N, LV-L).</div>
<div>No warnings generated during simulation.</div>
<div>I've done the following but to no avail:</div>
<div>1. Reinstalled eQuest (before installing it I checked if I
have the same problem with other projects. And other projects' SIM has
all the reports)</div>
<div>2. In the component tree I checked for load, system, plant
reports' defaults (both hourly and non-hourly) to see if anything
is wrong. (All in place)</div>
<div>3. copied just the .inp file to a new folder and opened the
file from eQuest but still have the same problem. I thought may be the
problem is in the .INP file and I thoroughly checked for any errors but
found nothing wrong to my knowledge.</div>
<div><br>
</div>
<div>Could someone help me figure out this problem?</div>
Thanks.</span><br>
-- <br>
Jimmy<br>
</div>
<br>
_______________________________________________<br>
Bldg-sim mailing list<br>
<a moz-do-not-send="true"
href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org"
target="_blank">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a><br>
To unsubscribe from this mailing list send a blank message to <a
moz-do-not-send="true"
href="mailto:BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a><br>
<br>
</blockquote>
</div>
<br>
<br>
</div>
<pre wrap="">
<hr size="4" width="90%">
_______________________________________________
Bldg-sim mailing list
<a class="moz-txt-link-freetext" href="http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org">http://lists.onebuilding.org/listinfo.cgi/bldg-sim-onebuilding.org</a>
To unsubscribe from this mailing list send a blank message to <a class="moz-txt-link-abbreviated" href="mailto:BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG">BLDG-SIM-UNSUBSCRIBE@ONEBUILDING.ORG</a>
</pre>
</blockquote>
</body>
</html>