<div dir="ltr"><div>Hi,</div>
<div> </div>
<div>I would like to model a 26storey   existing building with EQuest, however the plans  are in pdf format, and I am not sure if I need to redraw them in autocad.  the first two floors has different shape and part of the 2nd  floor is connected to 1st floor as a 2 storey gallery and there are 2 parking under ground(under first floor). I am wondering if I should model the whole building in the schematic design without the first 2 floors and parkings and then add them to the building? </div>

<div>Building is rectangular in shape and the 24 story is expanded over the first 2 floor.</div>
<div> </div>
<div>How can I model the 2 connected story? and how can I put these 2 stories under the whole building.</div>
<div> </div>
<div>Thanks alot,</div>
<div>Mona A.</div></div>