Dear all,<br><br>I'm using the program WUFI to model moisture behavior in a wall section with a rain screen, 1" air space and a 6" SIP panel. I'm modeling the SIP panel as a OSB+EPS+OSB.<br><br>The existing design drawings have a Blueskin weather barrier which is both air and vapor barrier between the air space and SIP panel. I modeled the assembly with and without the weather barrier and see that moisture behavior is pretty similar in both cases - it either gradually decreases or stabilizes across all components/sensor locations. The results seem to point out that there will be no condensation issues even without the weather barrier.<br>
<br>Does anybody have any experience with similar issues? How are weather barriers used in relation to SIP panels generally?<br><br>Thanks,<br><br>RAMANA KOTI Assoc. ASHRAE LEED® AP <br>Sustainable Building Analyst<br><br>
ELEMENTS division of BNIM architects<br>106 West 14th Street Suite 200<br>Kansas City Missouri 64105<br><br>d 816.783.1635 f 816.783.1501<br><a href="http://bnim.com">bnim.com</a> | <a href="http://elements.bnim.com">elements.bnim.com</a> <br>