<p>Dear folks,<br> <br>I am simulating a project to be LEED-certified (LEED-NB).</p>
<div>There is a central chiller plant using thermal storage that provides thermal energy to 6 buildings.</div>
<div> </div>
<div>In the document "Required Treatment of District Thermal Energy in LEED-NC version 2.2 and LEED for Schools" Table 1 as below: </div>
<div> </div>
<div>Complete 2 energy models using the following methods:<br>• Step 1: Building stand-alone scenario document performance of project building alone, with upstream equipment modeled as cost neutral</div>
<div><br>• Step 2: Aggregate building / DES scenario document combined performance of the building and central plant by including the performance of upstream equipment</div>
<div><br>Please advise what is the proper setting for such a district thermal energy system in Equest,.</div>
<div> </div>
<div>During each step,which way is more appropriate to simulat 6 buildings whitin one Equest model or separately simulate each building?</div>
<div> </div>
<div>Jessi</div>
<div> </div>
<div> <br> </div>