Hello all,<br><br>I have just created a trial project using natural ventilation in eQuest.  I have 5% openable area to the net floor area. I multiplied by 0.6 (for total vent area fraction) I end up with 0.3 for my total vent area fraction.<br>
<br>When compared to a system using the "air-change" method for natural ventilation, the heating energy is approximately equal when "0.18" air changes is specified.  However, the cooling energy increases by a factor of 6.  Also, this 0.18 air changes per hour is only 65% of what would be required if 62.1 were used.<br>
<br>Has anyone used the S-G method for natural ventilation successfully?  Any thoughts on the above observations?<br><br>Thanks,<br clear="all"><br>-- <br>Karen