<p>Hi All,</p>
<p>We are working on an eQUEST simulation for a meseum. Three systems have humidifiers in the air handlers and side stream dehumidifiers. The humidifiers add moistures by blowing compressed air with water into the supply air stream, instead of directly injecting water steam. One of the three dehumidifiers uses gas and the other two use electricity. The relative humidity (RH) has to be controlled within 20% to 30%. However, couple problems came out.</p>

<p>1. There is no compressed-air type humidifier in eQUEST.</p>
<p>2. The humidifiers we specified (any humidifier type available in eQUEST) did not seem to work because for two systems, the RH falls below the controlled range for most of the hours. </p>
<p>3. On dehumidification side, we used "add-on desiccant" tab to plug in the dehumidifier. But the "SOL-VENT-AIR-1" type dehumidifier type did not work at all no matter how we played with the input parameters, including the air flow rate through the desiccant unit as a fraction of the design supply air flow rate of the system, the outside air ratio, and so forth. </p>

<p>4. After we changed the desiccant system type to "LIQ-VENT-AIR-1" for all three systems, the humidity control worked for one system, but another one still have RH higher than the specified maximum RH value in a lot of hours. </p>

<p><br>Anyone knows why humidity control did not seem to work in this project? Any thought is appreciated!</p>
<p>Thanks.</p>
<div><br>Shawn</div>
<div> </div>
<div> </div>
<div>
<p class="MsoNormal" style="MARGIN: 1pt 0in"><strong><span style="FONT-SIZE: 8pt; FONT-FAMILY: Arial">Nexant, Inc.</span></strong></p>
<p class="MsoNormal" style="MARGIN: 1pt 0in"><span style="FONT-SIZE: 7.5pt; FONT-FAMILY: Arial">1401 Walnut St., Suite 400</span><br><span style="FONT-SIZE: 7.5pt; FONT-FAMILY: Arial">Boulder</span><span style="FONT-SIZE: 7.5pt; FONT-FAMILY: Arial">, CO 80302</span><span style="FONT-SIZE: 7.5pt; FONT-FAMILY: Arial"> </span></p>

<p class="MsoNormal" style="MARGIN: 1pt 0in"><span style="FONT-SIZE: 7.5pt; FONT-FAMILY: Arial">Ph:  (303) 998-2474</span></p>
<p class="MsoNormal" style="MARGIN: 1pt 0in"><span style="FONT-SIZE: 7.5pt; FONT-FAMILY: Arial">Fax: (303) 440-6644</span></p>
<p class="MsoNormal" style="MARGIN: 1pt 0in"><span style="FONT-SIZE: 7.5pt; FONT-FAMILY: Arial"><a href="mailto:xliu@nexant.com">xliu@nexant.com</a></span></p></div>
<div> </div>
<div> </div>
<div><font color="#400040" size="2"></font> </div>