<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=utf-8">
<META content="MSHTML 6.00.6000.16587" name=GENERATOR></HEAD>
<BODY style="MARGIN: 4px 4px 1px; FONT: 10pt Tahoma">
<DIV>This change was issued in Addendum a.</DIV>
<DIV>Bill<BR><BR>>>> "Zoeteman, Mark R." <mrzoeteman@FTCH.com> 1/25/2008 2:44 PM >>><BR>I've reviewed all the 90.1-2004 addenda and don't see where vertical<BR>fenestration requirement of "distributing uniformly in horizontal bands<BR>across the four orientations" has been removed. Addenda "as" which<BR>refers to this section doesn't remove either.<BR><BR>Mark Zoeteman, FTC&H <BR>-----Original Message-----<BR>From: Zoeteman, Mark R. <BR>Sent: Friday, January 25, 2008 3:40 PM<BR>To: 'Michael.Rosenberg@state.or.us'; BLDG-SIM@gard.com<BR>Subject: RE: [BLDG-SIM] 90.1-2004 Appendix G Glazing for Baseline case<BR><BR><BR>-----Original Message-----<BR>From: BLDG-SIM@gard.com [mailto:BLDG-SIM@gard.com] On Behalf Of Michael<BR>Rosenberg<BR>Sent: Wednesday, May 16, 2007 1:47 PM<BR>To: BLDG-SIM@gard.com<BR>Subject: [BLDG-SIM] 90.1-2004 Appendix G Glazing for Baseline case<BR><BR>The requirement to distribute fenestration uniformly in horizontal<BR>bands across the four orientations has been removed from Appendix G in<BR>the published Addenda Supplement to 90.1, 2004. See the ASHRAE website<BR>for the supplement.<BR><BR><A href="http://www.ashrae.org/technology/page/132">http://www.ashrae.org/technology/page/132</A><BR><BR><BR><BR><BR>Michael Rosenberg<BR>Oregon Department of Energy<BR>625 Marion St. N.E.<BR>Salem, OR 97301-3742<BR>Phone : (503) 373-7809<BR>Fax: (503) 373-7806<BR><BR>>>> Chris Jones <cj@cr-jay.ca> 5/16/2007 9:56:02 AM >>><BR>Appendix G notes that for the Baseline building: "Vertical fenestration<BR>areas for new buildings and additions shall equal that in the proposed<BR>design or 40% of gross above grade wall area, whichever is smaller, and<BR>shall be distributed uniformly in horizontal bands across the four<BR>orientations."<BR>Does this mean that the Baseline building gets windows on all walls on<BR>each orientation whether or not the Design case has a window in all<BR>walls on each orientation. For example, if the west orientation has 30%<BR>glazing overall but many spaces have no windows - some walls on the west<BR>face have more that 30%. Do those spaces in the Baseline case get 30%<BR>glazing? Or do I only put windows in the Baseline case where there are<BR>windows in the Design case.<BR><BR>Thanks for any help!<BR><BR><BR><BR><BR><BR><BR><BR>Chris Jones, P.Eng.<BR>14 Oneida Avenue<BR>Toronto, ON M5J2E3<BR>Tel. 416 203-7465<BR>Fax. 416 946-1005 <BR><BR>======================================================<BR>You received this e-mail because you are subscribed to the<BR>BLDG-SIM@GARD.COM mailing list. To unsubscribe from this mailing list<BR>send a blank message to BLDG-SIM-UNSUBSCRIBE@GARD.COM<BR><BR>======================================================<BR>You received this e-mail because you are subscribed to the<BR>BLDG-SIM@GARD.COM mailing list. To unsubscribe from this mailing list<BR>send a blank message to BLDG-SIM-UNSUBSCRIBE@GARD.COM<BR><BR>_______________________________________________<BR>Bldg-sim mailing list<BR>Bldg-sim@lists.onebuilding.org<BR><A href="http://lists.onebuilding.org/listinfo.cgi/bldg">http://lists.onebuilding.org/listinfo.cgi/bldg</A>-sim-onebuilding.org<BR></DIV></BODY></HTML>