<div>Hi,</div>
<div>We are modeling a hospital in San Francisco with add-on Indirect Evap cooling and humidity controls.  We are leaving all of the Indirect Evap settings to default (i.e. Evap + Main Cool Coil = Together, Drybulb High Limit 120 F, Effectiveness = 
0.80, etc).  Our results are showing that the heating energy consumption increases by 32,600 therms and the cooling energy increases instead of decreasing.  </div>
<div> </div>
<div>As a test we ran the same building model in Las Vegas with and without Indirect Evap and found that while the cooling energy decreased dramatically, the heating energy went up so much that overall the building wasn't saving energy.  
</div>
<div> </div>
<div>Any thoughts on why the heating energy would increase with the Evaporative Cooler?  And why it would increase cooling energy in SF?</div>
<div> </div>
<div>Thanks!<br>Kathryn</div>