<html><head><style type="text/css"><!-- DIV {margin:0px;} --></style></head><body><div style="font-family:times new roman, new york, times, serif;font-size:12pt"><DIV>My students are working on skylighting designs for simple models in Ecotect. They are starting with a simple box with no windows. They insert a horizontal window into the ceiling plane. Illuminance calculations look reasonable. They then insert a roof zone on top of the box, intending to eventually make a 'lay-light' scheme. But before inserting any glazing into the roof zone, they run the illuminance calcs to check the roof was inserted properly - expecting to see no daylight in the lower box. Yet there is a low level wash on the interior. </DIV>
<DIV> </DIV>
<DIV>Anyone run into this before? Any suggestions?</DIV>
<DIV> </DIV>
<DIV>Thanks,</DIV>
<DIV> </DIV>
<DIV>Adam</DIV></div><PRE>
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM@GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@GARD.COM
</PRE></body
></html>