<div>Hello.</div>
<div> </div>
<div>I am trying to use the DOE-2 weather processor to convert measured data (dry bulb temperature, relative humidity, atmospheric pressure, radiation, wind speed, wind direction and sky cover) into a .bin file. I am using the OTHER format and the PACK command. 
</div>
<div> </div>
<div>I tried to use the weather processor that is distributed with EE4, called 'wth' and it reads the input file, and does not cause errors, but the data it LISTS must be default data, (db = 0, pressure = 0.2 for, etc for all 8760 entries) - it is definitely not the data I have listed in the 
WEATHR.TMP file!!</div>
<div> </div>
<div>When I use the weather processor from the DOE website, "DOEWTH" it reads the INPUT.TMP file, but does not read the weather file.</div>
<div> </div>
<div>Any idea where I am going wrong, or what may be happening. If anyone has successfully converted an OTHER file to .bin, could you send me the WEATHR.TMP file??</div>
<div> </div>
<div>Thanking you in advance.</div>
<div> </div>
<div>Christianne</div>
<div>Enermodal Engineering Ltd.</div>