<DIV>Hello all,</DIV> <DIV> </DIV> <DIV>From the help file of eQUEST, it seems that eQUEST 3.6 can model air-to-water heat pump, well-water-to-water heat-pump and loop-to-loop heat-pump.</DIV> <DIV> </DIV> <DIV>When I model from the DD Wizard, the only system type alowed for heat pump is DX system, which means there is no chilled water flow in the systems. So I have to find a new method.</DIV> <DIV> </DIV> <DIV>I built up a conventional system with water cooled, then I change the chiller type to loop-to-loop heat pump, then the program ask me for HW loop, HW loop pump and CW loop, I selected the HW loop to hot water loop and associated pump, but I can not select the condensor water loop as the CW loop. It asked me to choose from libarry, so I chosed from Default-CW, but the program give me the warning " the Default-CW is an imcompatible type".</DIV> <DIV> </DIV> <DIV>I tried other loop types, but on one works.
Does anyone has successfully tried this loop-to-loop heat pump before? Or is there any direction for set this up in eQUEST?</DIV> <DIV> </DIV> <DIV>Any suggestion is hightly appreciated.</DIV> <DIV> </DIV> <DIV>Thanks.</DIV> <DIV> </DIV> <DIV>Regards,</DIV> <DIV> </DIV> <DIV>David</DIV> <DIV> </DIV> <DIV> </DIV><p>
<hr size=1>Building a website is a piece of cake. <br>Yahoo! Small Business gives you <a href="http://us.rd.yahoo.com/evt=48251/*http://smallbusiness.yahoo.com/webhosting/?p=PASSPORTPLUS">all the tools to get online.</a>