<div>Dear All,</div>  <div> </div>  <div>I experienced an issue when I use eQUEST. I model a building in cold climate with VAV system. In the wizard mode, I found the system heat source is "not installed". But when I change to electricity, I found the heating enery use for system heating is zero. I also tried other options, always found that the system heat source is useless. I found that all the heating goes the zone level. Based on my understanding, this should not be the real case.</div>  <div> </div>  <div>I set the air supply temperature as constant as 55F (around 13 degree C), zone entering max air tem as 95F. Enen I set the zone entering max air tem as 86 (30 C). The system heating coil still has no load.</div>  <div> </div>  <div>Has anyone experience the same problem before and know to to solve this problem?</div>  <div> </div>  <div>Thanks a lot.</div>  <div> </div>  <div>Regards,</div>  <div> </div>  <div>David</div><p>
      <hr size=1>Ready for the edge of your seat? 
<a href="http://us.rd.yahoo.com/evt=48220/*http://tv.yahoo.com/">Check out tonight's top picks</a> on Yahoo! TV.