Dear all,<br><br>I'm facing some challenges with Ecotect, partly because of my limited familiarity with the tool. Specifically with a US building in mind, I need your input on the following:<br><br>1. Is it possible to get a Btu number for whole building energy consumption directly out of the software? (as opposed to the exclusive heating and cooling Btus output in the thermal analysis tab)
<br>2. Is it possible to associate a utility rate, time of use or linear, and get a total dollar number for annual utility cost - for instance as required by ASHRAE energy cost budget/Appendix G?<br>3. Is it possible to get a number for peak electric demand as opposed to just peak cooling load?
<br><br>Thanks,<br clear="all"><br>Ramana Koti, LEED AP<br>Sustainable Building Analyst<br><br>ELEMENTS | a division of berkebile nelson immenschuh mcdowell architects<br>106 W. 14th Street Suite 200<br>Kansas City, Missouri 64105
<br><br>p 816.783.1635 f 816.783.1501<br>www.bnim.com| <a href="http://elements.bnim.com">elements.bnim.com</a>