<div>Hi Anna,</div>
<div> </div>
<div>Pitched roofs can be a pain.  If your geometry is complicated, the program will not be able to calculate the pitched roof geometry.  Simple rectangles, L-shapes and T-shapes work the best for pitched roofs.  You may be able to simplify the geometry a little bit and have the program calculate the pitched roof.
</div>
<div> </div>
<div>The other way to handle it is to break the building into a couple of shells and then do the pitched roof.  The program will always locate the main peak along the longer dimension of a rectangle.  Sometimes you can also approximate using flat roofs, depending on what info you are after.
</div>
<div> </div>
<div>If it's a really complicated roof, I usually get as close as I can using the wizard, and then make edits in detailed edit mode.</div>
<div> </div>
<div>One thing I haven't been able to figure out is how to get the wizard to do knee walls or cathedral ceilings--anyone know?</div>
<div> </div>
<div>Hope this helps.</div>
<div> </div>
<div>~karen~<br clear="all"><br>-- <br>Karen Walkerman<br>802-238-0980<br><a href="mailto:kwalkerman@gmail.com">kwalkerman@gmail.com</a> </div>