<html>
<body>
The tricky thing is the schedule of fireplace use. Then you need to
determine how much heat is transferred into the space versus how much
goes up the chimney. Then define a process load and schedule.
Set the sensible gain appropriately. In the zone you need to define
an exhaust fan, fan power and schedule to match the source use
schedule.<br><br>
At 17:24 2007-07-05, you wrote:<br>
<blockquote type=cite class=cite cite=""><font size=2>Hello
Analyst/Engineers,<br>
<br>
Need input on how to model fireplace and the dedicated exhaust fan.<br>
It is 300,000Btu/h gas fire place that is used for esthetical only. All
heat is being exhausted through the chimney with 3200cfm VSD exhaust
fan.
<ol>
<li>Can somebody point me how to model this in eQuest?</font>
<li><font size=2>Since it is not used for heating purposes, I assume it
should be modeled both for baseline and proposed model?</font>
</ol><font size=2>Any input is greatly appreciated.<br>
Thanks<br>
<br>
Virdiansyah "Virdi" Permana<br>
</font><font size=2 color="#008000"><b>EMSI<br>
</b></font><font size=2>Energy Analyst<br>
(202) 291 3102 T<br>
(202) 291 3107 F</font> <br>
<font face="Times New Roman, Times"> <br>
</font><br>
<pre>
You received this e-mail because you are subscribed
to the BLDG-SIM@GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@GARD.COM
</pre><font face="Courier New, Courier"></blockquote>
<x-sigsep><p></x-sigsep>
<br>
Chris Jones, P.Eng.<br>
14 Oneida Avenue<br>
Toronto, ON M5J2E3<br>
Tel. 416 203-7465<br>
Fax. 416 946-1005</font><PRE>
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM@GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@GARD.COM
</PRE></body>
</html>