Hi All,<br><br>I have a question regarding eQuest:<br><br>I'm
modeling a house that will use a ground source heat pump with boiler
backup as a heat source.  The heat pumps will heat water that is
circulated through radiant tubing in the floor.  Is a loop-to-loop heat pump a good way to model this?  I've done some research on it, but am not sure whether this can be modeled in eQuest either in the wizards or parametric runs without changing the BDL file directly.
<br><br>How are my options for
modeling cooling systems limited with the heating system described above?<br>
<br>Any help is appreciated.<br><br>Thank You,<br><br>~Karen~<br clear="all"><br>-- <br>Karen Walkerman<br>Second Law Consulting<br>802-238-0980<br><a href="mailto:kwalkerman@gmail.com">kwalkerman@gmail.com</a>