Hi all,<br>I'm trying to model a central ground water source heat pump serving hot & cold water loops for a radiant heating & cooling system in eQuest.  The 110 F hot water loop from the heat pump (loop to loop HP type chiller) serves the radiant system directly, and has a secondary loop with a boiler attached to it to bring the temperature up from 110 F to 180 F to serve some fan coil units.  
<br>I'm having a hard time configuring the loops and plant equipment to even approximate this system.  Has anyone tried to model something like this in eQuest?  From what I understanding, you can't put a boiler on a secondary loop, and I'm hitting a wall with that.  If I put the boiler and the HP on the same primary loop, I get errors that tell me 180 F is too high a temperature for a GSHP water loop.  The closest I seem to be able to get is to model the system with two separate HW loops - one for the fan coils with only a boiler and one for the radiant system with the HP.  But, then I can't use the heat pump to preheat for the FCU loop with this model.  
<br><br>Any thoughts?<br><br>Thanks,<br>Aleka<br>