<div>Dear all,</div>  <div> </div>  <div>I have a question about the infiltration rate in the ASHRAE 90.1-2004. As we simulate the base case building energy use, we try to find out what is the reference infiltration rate setup up by ASHRAE 90.1-2004. However, we only find in section 5.4.3.2 (page 180) value is "2.0 L/s.m2 for other products". When we use e-QUEST to simulate the building energy use, we found that the default infiltration rate is set as 0.038 CFM/ft2 for exterior wall area, which is about 0.2 L/s.m2 per exterior wall area.</div>  <div> </div>  <div>Could somebody tell me what is the reference infiltration rate per square exterior wall area based on ASHRAE 90.1-2004.</div>  <div> </div>  <div>Thank you very much for your help in advance.</div>  <div> </div>  <div>Regards,</div>  <div> </div>  <div>David</div><p>
      <hr size=1>Looking for a deal? <a href="http://us.rd.yahoo.com/evt=47094/*http://farechase.yahoo.com/;_ylc=X3oDMTFicDJoNDllBF9TAzk3NDA3NTg5BHBvcwMxMwRzZWMDZ3JvdXBzBHNsawNlbWFpbC1uY20-">Find great prices on flights and hotels</a> with Yahoo! FareChase.