<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:st1="urn:schemas-microsoft-com:office:smarttags" xmlns="http://www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<meta name=Generator content="Microsoft Word 11 (filtered medium)">
<!--[if !mso]>
<style>
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style>
<![endif]--><o:SmartTagType
namespaceuri="urn:schemas-microsoft-com:office:smarttags" name="place"/>
<o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="Street"/>
<o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="PostalCode"/>
<o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="State"/>
<o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="City"/>
<o:SmartTagType namespaceuri="urn:schemas-microsoft-com:office:smarttags"
name="address"/>
<!--[if !mso]>
<style>
st1\:*{behavior:url(#default#ieooui) }
</style>
<![endif]-->
<style>
<!--
/* Font Definitions */
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman";}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{color:blue;
text-decoration:underline;}
p.MsoPlainText, li.MsoPlainText, div.MsoPlainText
{mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman";}
p.MsoAutoSig, li.MsoAutoSig, div.MsoAutoSig
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman";}
p
{mso-margin-top-alt:auto;
margin-right:0in;
mso-margin-bottom-alt:auto;
margin-left:0in;
font-size:12.0pt;
font-family:"Times New Roman";}
pre
{margin:0in;
margin-bottom:.0001pt;
font-size:10.0pt;
font-family:"Courier New";}
span.EmailStyle20
{mso-style-type:personal;
font-family:Arial;
color:navy;}
span.EmailStyle23
{mso-style-type:personal-reply;
font-family:Arial;
color:navy;}
@page Section1
{size:8.5in 11.0in;
margin:1.0in 1.25in 1.0in 1.25in;}
div.Section1
{page:Section1;}
-->
</style>
</head>
<body lang=EN-US link=blue vlink=blue>
<div class=Section1>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>Can someone refresh my memory on importing
a W5 file into eQUEST. I exported the .txt file from Window 5 and placed it in
the “Window” folder in the eQUEST directory.<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>When I create a new glass type code in
eQUEST, how do I reference it so that it reads from that file?<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>Thank you!<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>Kendra<o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'><o:p> </o:p></span></font></p>
<div>
<p><b><font size=3 color="#333333" face=Arial><span style='font-size:12.0pt;
font-family:Arial;color:#333333;font-weight:bold'>Kendra Tupper</span></font></b><font
color=navy><span style='color:navy'><br>
</span></font><i><font color=gray face=Arial><span style='font-family:Arial;
color:gray;font-style:italic'>LEED® AP</span></font></i><font color=navy><span
style='color:navy'><br>
</span></font><b><font color="#333333" face=Arial><span style='font-family:
Arial;color:#333333;font-weight:bold'>FLACK</span></font><font color=navy><span
style='color:navy'> </span></font></b><b><font color="#969696" face=Arial><span
style='font-family:Arial;color:#969696;font-weight:bold'>+</span></font></b><b><font
color="#333333" face=Arial><span style='font-family:Arial;color:#333333;
font-weight:bold'> KURTZ</span></font></b><font color=navy><span
style='color:navy'><br>
</span></font><st1:address w:st="on"><st1:Street w:st="on"><font size=2
color=navy face=Arial><span style='font-size:10.0pt;font-family:Arial;
color:navy'>405 Howard St.</span></font></st1:Street><font size=2 color=navy
face=Arial><span style='font-size:10.0pt;font-family:Arial;color:navy'> <st1:City
w:st="on">San Francisco</st1:City>, <st1:State w:st="on">CA</st1:State> <st1:PostalCode
w:st="on">94105</st1:PostalCode></span></font></st1:address><font color=navy><span
style='color:navy'><br>
</span></font><font size=2 color=gray face=Arial><span style='font-size:10.0pt;
font-family:Arial;color:gray'>Direct</span></font><font size=2 color=navy
face=Arial><span style='font-size:10.0pt;font-family:Arial;color:navy'>
(415) 402-5840</span></font><font color=navy><span style='color:navy'><br>
</span></font><font size=2 color=gray face=Arial><span style='font-size:10.0pt;
font-family:Arial;color:gray'>Email </span></font><font color=navy><span
style='color:navy'> <a href="mailto:kendra.tupper@sf.fk.com%20"><font size=2
face=Arial><span style='font-size:10.0pt;font-family:Arial'>kendra.tupper@sf.fk.com</span></font></a></span></font><o:p></o:p></p>
</div>
<div>
<div class=MsoNormal align=center style='text-align:center'><font size=3
face="Times New Roman"><span style='font-size:12.0pt'>
<hr size=2 width="100%" align=center tabindex=-1>
</span></font></div>
<p class=MsoNormal><b><font size=2 face=Tahoma><span style='font-size:10.0pt;
font-family:Tahoma;font-weight:bold'>From:</span></font></b><font size=2
face=Tahoma><span style='font-size:10.0pt;font-family:Tahoma'>
BLDG-SIM@gard.com [mailto:BLDG-SIM@gard.com] <b><span style='font-weight:bold'>On
Behalf Of </span></b>Timothy Moore<br>
<b><span style='font-weight:bold'>Sent:</span></b> Sunday, April 29, 2007 10:25
PM<br>
<b><span style='font-weight:bold'>To:</span></b> BLDG-SIM@gard.com<br>
<b><span style='font-weight:bold'>Subject:</span></b> [BLDG-SIM] Simplied
windows and glass libraries</span></font><o:p></o:p></p>
</div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'><o:p> </o:p></span></font></p>
<div style='margin-top:6.0pt'>
<p class=MsoNormal><font size=2 color=green face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:green'>A further clarification regarding
modeling of whole-window U-Factor in eQuest:</span></font><o:p></o:p></p>
</div>
<div style='margin-top:6.0pt'>
<p class=MsoNormal><font size=2 color=green face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:green'>A closer look (confirmed by DOE-2 and
Window5 documentation) reveals that eQuest/DOE-2 does not reference the frame
information in the DOE-2 report generated by LBL Window5. In fact, the
center-of-glass and "overall" U-values indicated in the DOE-2
report from Window5 are the same (both are COG values).</span></font><font
face=Arial><span style='font-family:Arial'> </span></font><o:p></o:p></p>
</div>
<div style='margin-top:6.0pt'>
<p class=MsoNormal><font size=2 color=green face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:green'>DOE-2 calculates the overall U-Value as
part of the hourly simulation based on the frame width, conductance, and spacer
type specified in eQuest. Therefore, while you should still use the DOE-2
report from Window5 to provide eQuest with the optical data for appropriate
calculation of SHGC per angle of incidence, you will still need to enter the
frame width, U-value, and edge spacer type in eQuest---assuming you’ve
modeled the actual dimensions of the fenestration. If you’ve lumped
windows together into long strips on each façade and want the overall U-value
to be at least reasonably accurate, you’ll need to add frame width for
each window so that the glass-to-frame area will be representative of the
actual design.</span></font><o:p></o:p></p>
</div>
<div style='margin-top:6.0pt'>
<p class=MsoNormal><font size=2 color=green face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:green'>Timothy</span></font><o:p></o:p></p>
</div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'><o:p> </o:p></span></font></p>
<div class=MsoNormal align=center style='text-align:center'><font size=3
face="Times New Roman"><span style='font-size:12.0pt'>
<hr size=2 width="100%" align=center tabIndex=-1>
</span></font></div>
<p class=MsoNormal style='margin-bottom:12.0pt'><b><font size=2 face=Tahoma><span
style='font-size:10.0pt;font-family:Tahoma;font-weight:bold'>From:</span></font></b><font
size=2 face=Tahoma><span style='font-size:10.0pt;font-family:Tahoma'>
BLDG-SIM@gard.com [mailto:BLDG-SIM@gard.com] <b><span style='font-weight:bold'>On
Behalf Of </span></b>Robin Mitchell<br>
<b><span style='font-weight:bold'>Sent:</span></b> Wednesday, April 25, 2007
8:45 PM<br>
<b><span style='font-weight:bold'>To:</span></b> BLDG-SIM@gard.com<br>
<b><span style='font-weight:bold'>Subject:</span></b> [BLDG-SIM] Simplied
windows and glass libraries</span></font><o:p></o:p></p>
<p class=MsoNormal><font size=2 color=blue face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:blue'>A point of clarification about WINDOW 5
and DOE2 files -- it is not possible to use THERM files for export to the DOE2
file that WINDOW 5 makes. So the method below, using the generic frame choices
that come with WINDOW 5, is probably the most straightforward way to create the
window for DOE2.</span></font><o:p></o:p></p>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<p class=MsoPlainText style='margin:0in;margin-bottom:.0001pt'><font size=2
face="Courier New"><span style='font-size:10.0pt;font-family:"Courier New"'>Robin
Mitchell</span></font><o:p></o:p></p>
<p class=MsoPlainText style='margin:0in;margin-bottom:.0001pt'><font size=2
face="Courier New"><span style='font-size:10.0pt;font-family:"Courier New"'>Windows
& Daylighting Group<o:p></o:p></span></font></p>
<p class=MsoPlainText style='margin:0in;margin-bottom:.0001pt'><st1:City w:st="on"><font
size=2 face="Courier New"><st1:City w:st="on"><span style='font-size:10.0pt;
font-family:"Courier New"'>Lawrence</span></st1:City></font></st1:City><font
size=2 face="Courier New"><span style='font-size:10.0pt;font-family:"Courier New"'>
<st1:City w:st="on"><st1:place w:st="on"><st1:City w:st="on"><st1:place w:st="on">Berkeley</st1:place></st1:City></st1:place></st1:City>
National Laboratory<o:p></o:p></span></font></p>
<p class=MsoPlainText style='margin:0in;margin-bottom:.0001pt'><font size=3
face="Times New Roman"><span style='font-size:12.0pt'><o:p> </o:p></span></font></p>
<div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
</div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'><o:p> </o:p></span></font></p>
<div class=MsoNormal align=center style='text-align:center'><font size=3
face="Times New Roman"><span style='font-size:12.0pt'>
<hr size=2 width="100%" align=center tabIndex=-1>
</span></font></div>
<p class=MsoNormal style='margin-bottom:12.0pt'><b><font size=2 face=Tahoma><span
style='font-size:10.0pt;font-family:Tahoma;font-weight:bold'>From:</span></font></b><font
size=2 face=Tahoma><span style='font-size:10.0pt;font-family:Tahoma'>
BLDG-SIM@gard.com [mailto:BLDG-SIM@gard.com] <b><span style='font-weight:bold'>On
Behalf Of </span></b>Timothy Moore<br>
<b><span style='font-weight:bold'>Sent:</span></b> Wednesday, April 25, 2007
5:07 PM<br>
<b><span style='font-weight:bold'>To:</span></b> BLDG-SIM@gard.com<br>
<b><span style='font-weight:bold'>Subject:</span></b> [BLDG-SIM] Simplied
windows and glass libraries</span></font><o:p></o:p></p>
<p class=MsoNormal><font size=2 color=green face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:green'>Kevin,</span></font><o:p></o:p></p>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=green face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:green'>There is a method using LBL Window
program that get the U-Factor for the actual frame into the DOE-2
report without requiring you to get the frame/mullion details and then model
this in Therm:</span></font><o:p></o:p></p>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=green face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:green'>First, based on selection of the actual
glass from the international glazing database, do the center-of glass
calculation for the glazing unit within that part of Window5. Then use the
U-Factor charts for the frame/mullion system(s) you plan to use or are
considering (provided by most supplies of curtain wall systems, etc.) to
determine what the glazing system U-factor should be for the appropriate ratio
of glazed area to total area including frame. Then return to Window5 and <em><i><font
face=Arial><span style='font-family:Arial'>match</span></font></i></em> the
system U-Factor from this chart by copying and modifying properties for the
closest available frame type/material in the Window5 frame library, checking
the Total Window Results when combined with your glazing unit. When, given the
same glass-to-frame area ratio, this result matches the one from the
system U-Factor chart for the frame/mullion system, you can then create the
DOE-2 report from Window5 that you will reference in eQuest. Thus you will have
the angular optical data for the correct SHGC at each angle of incidence and
also an appropriate system U-Factor without having to actually model the frame.
This is particularly valuable if you are weighing a range of frame systems with
various insulating properties that also force or enable different glazing units
(i.e., they have a different maximum glazing pocket) and you want to see the
difference in the whole-building model.</span></font><o:p></o:p></p>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
<p class=MsoNormal><font size=2 color=green face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:green'>Cheers,</span></font><o:p></o:p></p>
<p class=MsoNormal><font size=2 color=green face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:green'>Timothy</span></font><o:p></o:p></p>
<div>
<div>
<div>
<p><font size=2 color=green face=Arial><span style='font-size:10.0pt;
font-family:Arial;color:green'>**********************************************<br>
Timothy Moore<br>
Integrated Sustainable Design Consultant <br>
LEED AP<o:p></o:p></span></font></p>
<p><font size=2 color=green face=Arial><span style='font-size:10.0pt;
font-family:Arial;color:green'>Whole Systems Design<br>
<st1:Street w:st="on"><st1:address w:st="on">910 Indian Rock Ave.</st1:address></st1:Street><br>
<st1:place w:st="on"><st1:City w:st="on">Berkeley</st1:City>, <st1:State w:st="on">CA</st1:State>
<st1:PostalCode w:st="on">94707</st1:PostalCode></st1:place><br>
Ph: (510) 525-4809<br>
Fx: (413) 480-7252<br>
<st1:City w:st="on"><st1:place w:st="on">Mobile</st1:place></st1:City>: (303)
324-1044<br>
</span></font><font color=green><span style='color:green'><a
href="mailto:tmoore@whole-systems-design.com"><font size=2 face=Arial><span
style='font-size:10.0pt;font-family:Arial'>tmoore@whole-systems-design.com</span></font></a><o:p></o:p></span></font></p>
<p><font size=3 color=green face="Times New Roman"><span style='font-size:12.0pt;
color:green'><o:p> </o:p></span></font></p>
</div>
</div>
</div>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'><o:p> </o:p></span></font></p>
<div class=MsoNormal align=center style='text-align:center'><font size=3
face="Times New Roman"><span style='font-size:12.0pt'>
<hr size=2 width="100%" align=center tabIndex=-1>
</span></font></div>
<p class=MsoNormal style='margin-bottom:12.0pt'><b><font size=2 face=Tahoma><span
style='font-size:10.0pt;font-family:Tahoma;font-weight:bold'>From:</span></font></b><font
size=2 face=Tahoma><span style='font-size:10.0pt;font-family:Tahoma'>
BLDG-SIM@gard.com [mailto:BLDG-SIM@gard.com] <b><span style='font-weight:bold'>On
Behalf Of </span></b>D. Charlie Curcija<br>
<b><span style='font-weight:bold'>Sent:</span></b> Wednesday, April 25, 2007
6:22 AM<br>
<b><span style='font-weight:bold'>To:</span></b> BLDG-SIM@gard.com<br>
<b><span style='font-weight:bold'>Subject:</span></b> [BLDG-SIM] Simplied
windows and glass libraries</span></font><o:p></o:p></p>
<p class=MsoNormal><font size=3 color=blue face=Arial><span style='font-size:
12.0pt;font-family:Arial;color:blue'>Kevin,</span></font><o:p></o:p></p>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
<p class=MsoNormal><font size=3 color=blue face=Arial><span style='font-size:
12.0pt;font-family:Arial;color:blue'>The best way to accurately model windows
is with WINDOW and THERM software (windows.lbl.gov). These tools are also
used for NFRC (National Fenestration Rating Council) certifications.
However, you will need all of the details of frame and glazing design to be
able to utilize these tools. WINDOW program is used to model glazing
system and THERM program is used to model frame and edge of glass
sections. The whole product is then assembled again in WINDOW program, so
WINDOW has dual role. While WINDOW program is easy to learn and can be
accomplished in half a day, THERM program requires 2-3 days of training
for novice users. Several companies offer training and our company (<a
href="http://www.designbuildersoftware.com">www.designbuildersoftware.com</a>)
is one of them. WINDOW program creates DOE2 report file, which can be
used with DOE 2.2 to assign windows. That provides the most accurate way
to model windows energy performance in a building.</span></font><o:p></o:p></p>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
<p class=MsoNormal><font size=3 color=blue face=Arial><span style='font-size:
12.0pt;font-family:Arial;color:blue'>If you don't have all of the details and
wish to get estimated performance, you can use one of the predefined windows in
DOE 2.2, closest to what you have. You should not use simplified way
(i.e., by assigning simple U-factor, SHGC and VT as single number), because
that produces gross errors. EnergyPlus program, which is newer
generation energy simulation engine from DOE does not even have an option to
specify windows and doors that way. You have to have WINDOW EnergyPlus
report file (equivalent to DOE2 report file) or use one of predefined windows
in EnergyPlus. Our tool DesignBuilder uses EnergyPlus simulation engine,
so you can try it out.</span></font><o:p></o:p></p>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
<p class=MsoNormal><font size=3 color=blue face=Arial><span style='font-size:
12.0pt;font-family:Arial;color:blue'>If you have further questions, you can
contact us directly.</span></font><o:p></o:p></p>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
<p class=MsoNormal><font size=3 color=blue face=Arial><span style='font-size:
12.0pt;font-family:Arial;color:blue'>Regards,</span></font><o:p></o:p></p>
<p class=MsoNormal><font size=3 color=blue face=Arial><span style='font-size:
12.0pt;font-family:Arial;color:blue'>Charlie Curcija</span></font><o:p></o:p></p>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'> <o:p></o:p></span></font></p>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt'><o:p> </o:p></span></font></p>
<div class=MsoNormal align=center style='text-align:center'><font size=3
face="Times New Roman"><span style='font-size:12.0pt'>
<hr size=2 width="100%" align=center tabIndex=-1>
</span></font></div>
<p class=MsoNormal style='margin-bottom:12.0pt'><b><font size=2 face=Tahoma><span
style='font-size:10.0pt;font-family:Tahoma;font-weight:bold'>From:</span></font></b><font
size=2 face=Tahoma><span style='font-size:10.0pt;font-family:Tahoma'>
BLDG-SIM@gard.com [mailto:BLDG-SIM@gard.com] <b><span style='font-weight:bold'>On
Behalf Of </span></b>Kevin J. Kyte<br>
<b><span style='font-weight:bold'>Sent:</span></b> Tuesday, April 24, 2007
11:05 AM<br>
<b><span style='font-weight:bold'>To:</span></b> BLDG-SIM@gard.com<br>
<b><span style='font-weight:bold'>Subject:</span></b> [BLDG-SIM] Simplied
windows and glass libraries</span></font><o:p></o:p></p>
<p class=MsoNormal><span class=EmailStyle20><font size=2 color=navy face=Arial><span
style='font-size:10.0pt'>Can anyone offer advice on the most accurate route to
model window performance?<o:p></o:p></span></font></span></p>
<p class=MsoNormal><span class=EmailStyle20><font size=2 color=navy face=Arial><span
style='font-size:10.0pt'>There are discrepancies between modeling glazing from
doe library and then modeling those values in simplified mode.<o:p></o:p></span></font></span></p>
<p class=MsoNormal><span class=EmailStyle20><font size=2 color=navy face=Arial><span
style='font-size:10.0pt'>Is this steady state vs. transient heat transfer? I
am not familiar and I could use a lesson in thermo.<o:p></o:p></span></font></span></p>
<p class=MsoNormal><span class=EmailStyle20><font size=2 color=navy face=Arial><span
style='font-size:10.0pt'>Is this discussed in the Engineer’s Manual? How
about if I used Window5? Will I be able to import Window files into Doe2.2?<o:p></o:p></span></font></span></p>
<p class=MsoNormal><span class=EmailStyle20><font size=2 color=navy face=Arial><span
style='font-size:10.0pt'> <o:p></o:p></span></font></span></p>
<p class=MsoNormal><span class=EmailStyle20><font size=2 color=navy face=Arial><span
style='font-size:10.0pt'> <o:p></o:p></span></font></span></p>
<p class=MsoNormal><span class=EmailStyle20><font size=2 color=navy face=Arial><span
style='font-size:10.0pt'> <o:p></o:p></span></font></span></p>
<p class=MsoNormal><span class=EmailStyle20><font size=2 color=navy face=Arial><span
style='font-size:10.0pt'>I would be grateful of any assistance.<o:p></o:p></span></font></span></p>
<p class=MsoNormal><span class=EmailStyle20><font size=2 color=navy face=Arial><span
style='font-size:10.0pt'> <o:p></o:p></span></font></span></p>
<p class=MsoAutoSig><span
class=EmailStyle20><font size=2 color=navy face=Arial><span style='font-size:
10.0pt'>Kevin</span></font></span><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:0in;margin-right:.5in;margin-bottom:
12.0pt;margin-left:1.0in'><font
color=black><span style='color:black'> </span></font><o:p></o:p></p>
<p class=MsoNormal style='mso-margin-top-alt:0in;margin-right:.5in;margin-bottom:
0in;margin-left:1.0in;margin-bottom:.0001pt'><font size=2 color=black
face=Tahoma><span style='font-size:10.0pt;font-family:Tahoma;color:black'> </span></font><font
size=2 face=Tahoma><span style='font-size:10.0pt;font-family:Tahoma'><o:p></o:p></span></font></p>
<pre style='margin-left:.5in'><font size=2 face="Courier New"><span
style='font-size:10.0pt'><o:p> </o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>==================<o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>You received this e-mail because you are subscribed <o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>to the BLDG-SIM@GARD.COM mailing list. To unsubscribe <o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>from this mailing list send a blank message to <o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>BLDG-SIM-UNSUBSCRIBE@GARD.COM<o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>==================<o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>You received this e-mail because you are subscribed <o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>to the BLDG-SIM@GARD.COM mailing list. To unsubscribe <o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>from this mailing list send a blank message to <o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>BLDG-SIM-UNSUBSCRIBE@GARD.COM<o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>==================<o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>You received this e-mail because you are subscribed <o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>to the BLDG-SIM@GARD.COM mailing list. To unsubscribe <o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>from this mailing list send a blank message to <o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>BLDG-SIM-UNSUBSCRIBE@GARD.COM<o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'><o:p> </o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>==================<o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>You received this e-mail because you are subscribed <o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>to the BLDG-SIM@GARD.COM mailing list. To unsubscribe <o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>from this mailing list send a blank message to <o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>BLDG-SIM-UNSUBSCRIBE@GARD.COM<o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'><o:p> </o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'><o:p> </o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>==================<o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>You received this e-mail because you are subscribed <o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>to the BLDG-SIM@GARD.COM mailing list. To unsubscribe <o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>from this mailing list send a blank message to <o:p></o:p></span></font></pre><pre><font
size=2 face="Courier New"><span style='font-size:10.0pt'>BLDG-SIM-UNSUBSCRIBE@GARD.COM<o:p></o:p></span></font></pre></div>
<PRE>
===========================
You received this e-mail because you are subscribed
to the BLDG-SIM@GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@GARD.COM
</PRE></body>
</html>