<div>I will be using eQuest to model a complex of housing units and will be examining two possible RE technologies for implementation: One is a ground source heat pump (gshp) and the other is a wood pellet stove.</div>
<div> </div>
<div>IF anyone has experience incorporating one or both of these systems into a simulation any advice would be appreciated:</div>
<div> </div>
<div>Specifically:</div>
<div>-Wood stove--what is the best way to represent a heat source like this?</div>
<div>-tips or tricks to avoid problems </div>
<div>-Validation of results</div>
<div> </div>
<div>thanks a lot</div>
<div> </div>
<div>tim</div>