Dear all,<br><br>I am modeling an operations facility in eQUEST with a few spaces that require heating with no cooling and are naturally ventilated (for Eugene Climate). <br><br>I assigned these spaces to the system type Heating/Ventilating Sys with the code-word HVSYS. Regarding modeling natural ventilation, eQUEST tutorial says "natural ventilation is available in eQUEST via the detailed interface, only for single duct DX systems. The calculation uses Sherman-Grimsrud algorithm."
<br><br>I am not aware if the Sherman-Grimsrud method is relevant to the kind of system I'm using, and this would be my first time to use it if I did. The BEPS report shows 98.3% of the times, systems zones are outside the throttling range. In the SS-R report, all the problematic zones listed are the same ones that use the HVSYS system. (None of the other zones that use Chilled water and hot water coils are listed in the SS-R).
<br><br>Any ideas on how the zones in question can be modeled to account for natural ventilation and Heating with no cooling? If relevant, how does the Sherman-Grimsrud method work in eQUEST?<br><br>Thank you,<br clear="all">
 <br>Ramana Koti, Sustainable Building Analyst<br>LEED AP<br><br>ELEMENTS | a division of berkebile nelson immenschuh mcdowell architects<br>106 W. 14th Street Suite 200<br>Kansas City, Missouri 64105<br><br>p 816.783.1635
 f 816.783.1501<br>www.bnim.com| <a href="http://elements.bnim.com">elements.bnim.com</a><br><br>