<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2963" name=GENERATOR></HEAD>
<BODY style="MARGIN: 4px 4px 1px; FONT: 10pt Tahoma">
<DIV>Fellow Modelers...</DIV>
<DIV> </DIV>
<DIV>I'm currently attempting to find some documentation on or means of modeling Water-to-Air Heat Pumps in eQUEST. Specifically, I am trying to model ground source heat pumps. I've looked at the following items, but beyond these I can't seem to find what I seek:</DIV>
<DIV> </DIV>
<DIV>1) WSHP...If I select a water-source heat pump, the only two modes I find are air- and water-cooled heat pumps that are generating hot and cold water. As for the water-to-water, I can connect it to a ground-coupled loop, but I'd like a water-to-air.</DIV>
<DIV> </DIV>
<DIV>2) Someone suggested using a water-cooled DX system, which can have the condenser connected to the ground loop, but the heat pump option available for heating is an air-to-air heat pump, not a water-to-air.</DIV>
<DIV> </DIV>
<DIV>Any assistance would be greatly appreciated. Thanks.</DIV>
<DIV> </DIV>
<DIV>Paul</DIV><PRE>
======================================================
You received this e-mail because you are subscribed
to the BLDG-SIM@GARD.COM mailing list. To unsubscribe
from this mailing list send a blank message to
BLDG-SIM-UNSUBSCRIBE@GARD.COM
</PRE></BODY></HTML>